eic-projdet-pfrich-mechanical-design-l AT lists.bnl.gov

Subject: ePIC pfRICH mechanical design mailing list

List archive

Re: [Eic-projdet-pfrich-mechanical-design-l] [EXTERNAL] pfRICH vessel update at Stony Brook University

From: Alex Eslinger <eslinger AT jlab.org>
To: Charles Joseph Naim <charlesjoseph.naim AT stonybrook.edu>, "eic-projdet-pfrich-mechanical-design-l AT lists.bnl.gov" <eic-projdet-pfrich-mechanical-design-l AT lists.bnl.gov>
Subject: Re: [Eic-projdet-pfrich-mechanical-design-l] [EXTERNAL] pfRICH vessel update at Stony Brook University
Date: Mon, 8 Apr 2024 17:43:08 +0000

Everyone,

As I discussed in the meeting today, when we decided on the final numbers for the end ring dimensions on the 1^st of April, my CAD had a discrepancy. I have since triple-checked it and come up with the final dimensions for the end ring.

Outer Radius: 649.322mm (no change)

Inner Radius: 630.272mm

Please see attached graphic for more information.

Thanks,

Alex

From: Eic-projdet-pfrich-mechanical-design-l <eic-projdet-pfrich-mechanical-design-l-bounces AT lists.bnl.gov> On Behalf Of Charles Joseph Naim via Eic-projdet-pfrich-mechanical-design-l
Sent: Friday, April 5, 2024 2:27 PM
To: eic-projdet-pfrich-mechanical-design-l AT lists.bnl.gov
Subject: [EXTERNAL] [Eic-projdet-pfrich-mechanical-design-l] pfRICH vessel update at Stony Brook University

Dear all,

Attached to this email, you will find a few slides discussing the foam, end-ring, and recent updates. Should you have any questions, please feel free to reply directly to this email, and I will provide a formal response during our upcoming meeting.

Thank you, and best regards,

Charles

Attachment: pfRICH Dimensions Check.pdf
Description: pfRICH Dimensions Check.pdf

[Eic-projdet-pfrich-mechanical-design-l] pfRICH vessel update at Stony Brook University, Charles Joseph Naim, 04/05/2024
- Re: [Eic-projdet-pfrich-mechanical-design-l] [EXTERNAL] pfRICH vessel update at Stony Brook University, Alex Eslinger, 04/08/2024