Skip to Content.
Sympa Menu

sphenix-electronics-l - Re: [Sphenix-electronics-l] DNP Abstracts are due

sphenix-electronics-l AT lists.bnl.gov

Subject: sPHENIX discussion of electronics

List archive

Chronological Thread  
  • From: Nathan Grau <ngrau AT augie.edu>
  • To: sphenix-electronics-l AT lists.bnl.gov
  • Subject: Re: [Sphenix-electronics-l] DNP Abstracts are due
  • Date: Mon, 1 Jul 2019 10:24:27 -0500

Hi all,

With a suggestion from Eric, I just submitted the following abstract to DNP.

Thanks,
Nathan

Validation of Production SiPMs for the sPHENIX Experiment
The sPHENIX detector is designed to measure calorimetric jets and heavy flavors 
to study the microscopic properties of the quark-gluon plasma produced in
ultrarelativistic heavy ion collisions at RHIC. The electromagnetic and
hadronic calorimeters will cover full azimuth and |$\eta$|<1. The calorimeters
are readout through common electronics and use silicon photomultipliers (SiPMs)
as the optical sensor. The full detector requires 106,000 SiPMs, with the
Hamamatsu S12572-015P having been chosen as the device to instrument the full
detector. The production of this large order is ongoing and monthly shipments
of 8,500 SiPMs began arriving at the University of Michigan in March of 2019.
In this talk we outline the test stand developed at the University of Debrecen,
the strategy to validate the SiPMs received, and the results of that evaluation.

On Fri, Jun 28, 2019 at 8:46 AM Nathan Grau <ngrau AT augie.edu> wrote:
Hi all,

I would like to submit the following abstract for DNP. Comments and suggestions are most welcome.

Thanks,
Nathan

Validation of Production SiPMs for the sPHENIX Experiment
Nathan Grau, Augustana University
for the sPHENIX Collaboration

The sPHENIX detector is designed to measure calorimetric jets and heavy flavors to study the microscopic properties of the quark-gluon plasma produced in ultrarelativistic heavy ion collisions at RHIC. The electromagnetic and hadronic calorimeters will cover full azimuth and |eta|<1. The calorimeters are readout through common electronics and use silicon photomultipliers (SiPMs) as the optical sensor. About 100,000 SiPMs are necessary for the full detector. The production of this large order is ongoing and monthly shipments of 8,500 SiPMs began arriving at the University of Michigan in March of 2019. In this talk we outline the test stand developed at the University of Debrecen, the strategy to validate the SiPMs received, and the results of that evaluation.

On Thu, Jun 27, 2019 at 5:52 PM eric mannel <mannel AT bnl.gov> wrote:
With everything going on, I missed the fact that abstracts for DNP 2019
are due in a couple of days, July 1, 2019.  If anyone is interested in
submitting an abstract for DNP please post to this list for consideration.

DNP website: https://dnp2019.columbian.gwu.edu/

Eric

--
Eric Mannel, Ph.D.
PHENIX Group
Dept of Physics
Brookhaven National Lab.
631/344-7626 (Office)
914/659-3235 (Mobile)

_______________________________________________
sPHENIX-electronics-l mailing list
sPHENIX-electronics-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/sphenix-electronics-l


--
Nathan Grau
Associate Professor of Physics
Augustana University
2001 S Summit Ave
Sioux Falls, SD 57197
(605) 274-5012


--
Nathan Grau
Associate Professor of Physics
Augustana University
2001 S Summit Ave
Sioux Falls, SD 57197
(605) 274-5012


  • Re: [Sphenix-electronics-l] DNP Abstracts are due, Nathan Grau, 07/01/2019

Archive powered by MHonArc 2.6.24.

Top of Page