sphenix-emcal-l AT lists.bnl.gov

Subject: sPHENIX EMCal discussion

List archive

[Sphenix-emcal-l] Workfest and new production

From: Blair Daniel Seidlitz <blair.daniel.seidlitz AT cern.ch>
To: "sphenix-hcal-l AT lists.bnl.gov" <sphenix-hcal-l AT lists.bnl.gov>, "sphenix-emcal-l AT lists.bnl.gov" <sphenix-emcal-l AT lists.bnl.gov>
Subject: [Sphenix-emcal-l] Workfest and new production
Date: Wed, 29 Nov 2023 23:31:12 +0000

Dear all,

Workfest after collaboration meeting

There was some interest in a workfest following the collaboration meeting. We will have a room on the 7^th and 8^th and will be working! I think we have had good communication and people working on important projects with a good set of priorities so I don't want to just up end it. But if you are new and want to jump into something this would be a good opportunity.

I have created a google doc with a signup where you can fill out the obvious things and then comment on what you would like to work on or continue what you have been doing and what that is exactly. If you want to contribute but don't have any ongoing calibrations work, put "open to new tasks". We will look at this and see if there are any preparations needed like MC samples or pointers to specific raw data.

google doc

https://docs.google.com/document/d/10yHSPiZ9mm-GyVw0C3IHe3CeVKE9qG6iXzbDWowx-KE/edit?usp=sharing

New production

We are currently running a new production. There are a few updates to the calorimeter software that you might find interesting and I have made some slides regarding this. They are attached. Stay tuned for the new DST names.

Best,
Blair

[Sphenix-emcal-l] Workfest and new production, Blair Daniel Seidlitz, 11/29/2023
- Re: [Sphenix-emcal-l] Workfest and new production, Blair Daniel Seidlitz, 11/29/2023