sphenix-hcal-l AT lists.bnl.gov

Subject: sPHENIX HCal discussion

List archive

Re: [Sphenix-hcal-l] Calorimeter beam test

From: Edward Kistenev <kistenev AT bnl.gov>
To: Abhisek Sen <sen.abhisek AT gmail.com>
Cc: "sphenix-emcal-l AT lists.bnl.gov" <sphenix-emcal-l AT lists.bnl.gov>, "sphenix-hcal-l AT lists.bnl.gov" <sphenix-hcal-l AT lists.bnl.gov>
Subject: Re: [Sphenix-hcal-l] Calorimeter beam test
Date: Thu, 17 Dec 2015 16:18:31 -0300

DO NOT FORGET that BULK LIGHT STOP (foil with holes for fibers and LED) is a MUST. I am sure MikeL/JohnT are fully able to figure out a good way of doing it.

Edward

Edward Kistenev, PhD

PHENIX Physicist

On Dec 17, 2015, at 4:03 PM, Abhisek Sen <sen.abhisek AT gmail.com> wrote:

Hello Edward,

Do we have cosmic data for large production tiles. What’s the current judgement on light yield difference small-large.

Check my slides at https://indico.bnl.gov/conferenceDisplay.py?confId=1580 . It was an issue with the tile itself, we were able to correct for it with the LEDs. I think we will get started with the large production tiles next week, if they are ready.

Cheers,

Abhisek

[Sphenix-hcal-l] Calorimeter beam test, John Haggerty, 12/17/2015
- Re: [Sphenix-hcal-l] Calorimeter beam test, Edward Kistenev, 12/17/2015
- Re: [Sphenix-hcal-l] Calorimeter beam test, Edward Kistenev, 12/17/2015
  - Re: [Sphenix-hcal-l] Calorimeter beam test, Abhisek Sen, 12/17/2015
    - Re: [Sphenix-hcal-l] Calorimeter beam test, Edward Kistenev, 12/17/2015