Skip to Content.
Sympa Menu

sphenix-hcal-l - [Sphenix-hcal-l] oHCal fiber lengths determined

sphenix-hcal-l AT lists.bnl.gov

Subject: sPHENIX HCal discussion

List archive

Chronological Thread  
  • From: Stefan Bathe <bathe AT bnl.gov>
  • To: sphenix-hcal-l AT lists.bnl.gov
  • Subject: [Sphenix-hcal-l] oHCal fiber lengths determined
  • Date: Thu, 14 Feb 2019 16:36:53 -0500

Hi Edward and All,

Frank and I determined the fiber lengths for the outer HCal:

https://indico.bnl.gov/event/5718/contributions/26622/attachments/21788/30011/FiberLengths.pdf

The slides contain a table with the lengths: one pepper shaker comes with
one bundle of 25 fibers, separated into two sub-bundles of 12 fibers each
(except for an additional spare fiber in one of the sub-bundles). The two
sub-bundles are identical in terms of fiber lengths (again, except for the
additional spare fiber in one of them). There are eleven different fiber
lengths per bundle (so all but two of the fibers have different length; the
spare fiber has the same length as the longest one).

The slides also contain a bunch of photos from the mock-up of an entire North
half of one sector. This is how we determined the fiber lengths. So these
lengths are not just calculated. The have been shown to work in practice.

Regards,
Frank and Stefan
--
---------------------------------------------------------------------------------
Stefan Bathe
Professor of Physics
Baruch College, CUNY

Baruch: BNL:
17 Lexington Ave Bldg. 510
office 940 office 2-229
phone 646-660-6272 phone 631-344-8490
----------------------------------------------------------------------------------





Archive powered by MHonArc 2.6.24.

Top of Page