Skip to Content.
Sympa Menu

sphenix-magnet-l - [Sphenix-magnet-l] Fwd: RE: sPHENIX Mag Scaffold

sphenix-magnet-l AT lists.bnl.gov

Subject: sPHENIX discussion of the superconducting solenoid

List archive

Chronological Thread  
  • From: Kin Yip <kinyip AT bnl.gov>
  • To: "sphenix-magnet-l AT lists.bnl.gov" <sphenix-magnet-l AT lists.bnl.gov>, "Meier, Richard" <remeier AT bnl.gov>, Sebastian A <sonny AT bnl.gov>, "Biggs, John C" <biggs AT bnl.gov>
  • Subject: [Sphenix-magnet-l] Fwd: RE: sPHENIX Mag Scaffold
  • Date: Tue, 26 Apr 2016 10:09:42 -0400

Hi Ray,

Thanks !  Are you helping to disconnect those temperature sensors, voltage taps and strain gauge etc. ?  Or you're telling other people to disconnect the ends inside
the junction box ??

I cc: to Richard, Sonny and Carter, just in case.

Dave told me last week that the electricians will help disconnect/disassembly/take away the electrical stuff next week.

Kin


-------- Forwarded Message -------- Subject: RE: sPHENIX Mag Scaffold Date: Tue, 26 Apr 2016 09:40:58 -0400 From: Ceruti, Raymond B <rayc AT bnl.gov> To: Yip, Kin <kinyip AT bnl.gov>, Pontieri, Stephen P <pontieri AT bnl.gov>, Phillips, David B <phillips AT bnl.gov> CC: Anerella, Michael D <mda AT bnl.gov>, Wanderer, Peter <wanderer AT bnl.gov>, Milidantri, Domenick J <milidantri AT bnl.gov>

Good Morning All,

    Thanks Steve, The triangle is now opened up and clear to have all relevant electrical wiring:  temp sensors, voltage taps, strain gauge etc. connections disconnected.  Everything except for the main power leads.  We will address this issue just before the valve box is actually lifted off of the solenoid after the four helium lines are separated.

 

Regards,

Ray  

 

From: Yip, Kin
Sent: Tuesday, April 26, 2016 9:27 AM
To: Pontieri, Stephen P; Ceruti, Raymond B; Phillips, David B
Cc: Anerella, Michael D; Wanderer, Peter
Subject: Re: sPHENIX Mag Scaffold

 

Thanks, Steve !

 

Kin Sent from my Verizon 4G LTE Smartphone

 

------ Original message------

From: Pontieri, Stephen P

Date: Tue, Apr 26, 2016 8:53 AM

To: Ceruti, Raymond B;Phillips, David B;Yip, Kin;

Cc: Anerella, Michael D;Wanderer, Peter;

Subject:RE: sPHENIX Mag Scaffold

 

Ray,

 

                The scaffold is inspected and ready for use. Let me know when you plan on using it again

 

Steve

 

From: Ceruti, Raymond B
Sent: Friday, April 22, 2016 3:55 PM
To: Phillips, David B <phillips AT bnl.gov>; Yip, Kin <kinyip AT bnl.gov>; Pontieri, Stephen P <pontieri AT bnl.gov>
Cc: Anerella, Michael D <mda AT bnl.gov>; Wanderer, Peter <wanderer AT bnl.gov>
Subject: RE: sPHENIX Mag Scaffold

 

Hi Dave, Kin, Stephen,

      We will be busy working on our test facility Monday but if the scaffold is clear to use Tuesday (4/26), we will start work on getting the valve box disconnected from the solenoid.

Regards,

Ray

 

From: Phillips, David B
Sent: Friday, April 22, 2016 2:12 PM
To: Ceruti, Raymond B
Cc: Pontieri, Stephen P
Subject: sPHENIX Mag Scaffold

 

Ray,

 

The scaffold for access to the dog house (same as before) will be installed Monday.

If you are going to use it let Steve Pontieri (x5575 cell 834-7044) know the day before so he can do the daily inspection.

I’m on vacation next week.

 

Dave

 

David Phillips

Building 911B

Upton, NY 11973

631-344-4671, Fax 631-344-5954, Cell 631-804-9477

On site pager 344-3456 then 4267 then your number

 





  • [Sphenix-magnet-l] Fwd: RE: sPHENIX Mag Scaffold, Kin Yip, 04/26/2016

Archive powered by MHonArc 2.6.24.

Top of Page