sPHENIX discussion of the superconducting solenoid

["Yip, Kin" <kinyip AT bnl.gov>]

Hi,

 

Below are the email correspondences between Pasquale and Tom Tallerico and myself.   Pasquale will send the electronic board that may help

measure temperature in long distance.  I include the pages that Tom found from the folders (in 1008 trailer) as well as photos of the board

that Pasquale took.

 

Just as a record.

 

Kin

 

From: Kin Yip [mailto:kinyip AT bnl.gov]
Sent: Friday, May 04, 2018 2:41 PM
To: fabbric <Pasquale.Fabbricatore AT ge.infn.it>
Cc: Craddock, Wesley W. <wwc AT slac.stanford.edu>; Masi Jr, Leonard <masi AT bnl.gov>; Danielson, Nils S <ndanielson AT bnl.gov>; Nace II, David <dnace AT bnl.gov>
Subject: Re: CLTS converter circuit to 4-20 ma signal.

 

Dear Pasquale,

Thank you very very much for your prompt response and the willingness to send us the electronic board.

We have got a FedEx account : 149833722 .    Can you please use this account number to send via FedEx so that at least we (BNL) pay for the "shipping"  ?? :-)

Please ship it to :
=========================
Dr. Kin Yip
Brookhaven National Lab.
Bldg. 911B
Upton, NY 11973-5000
USA
=========================

If you get a tracking no. after you send it, please tell us, too !   Thanks a lot !

Kin

On 05/04/2018 01:49 PM, Tallerico, Thomas N wrote:

Send it to Kin at Building 911B. He will give you his full address. Thanks a lot. We really appreciate it. Tom Tallerico

 

From: fabbric [mailto:Pasquale.Fabbricatore AT ge.infn.it]
Sent: Friday, May 04, 2018 12:19 PM
To: Yip, Kin; fabbric; Craddock, Wesley W.
Cc: Tallerico, Thomas N; Masi Jr, Leonard; Danielson, Nils S; Nace II, David
Subject: Re: Fw: CLTS converter circuit to 4-20 ma signal.

 

Dear Kin and Tom,

today I was in ASG and looked inside the rooms with old electronic devices. I found  just one converter box for CLTS with a board for two thermometers. I am sending a couple of photos. The circuit seems identical to the scheme you sent. I could send it next Monday through courier. Kin, please can you specify the delivery address?

Have a nice week end

Pasquale

 

 

 

Inviato da smartphone Samsung Galaxy.

 

-------- Messaggio originale --------

Da: "Yip, Kin" <kinyip AT bnl.gov>

Data: 01/05/18 21:49 (GMT+01:00)

A: fabbric <Pasquale.Fabbricatore AT ge.infn.it>, "Craddock, Wesley W." <wwc AT slac.stanford.edu>

Cc: "Tallerico, Thomas N" <tallerico AT bnl.gov>, "Masi Jr, Leonard" <masi AT bnl.gov>, "Danielson, Nils S" <ndanielson AT bnl.gov>, "Nace II, David" <dnace AT bnl.gov>

Oggetto: Fw: CLTS converter circuit to 4-20 ma signal.

 

Dear Pasquale and Wes,

 

After the test, for the real experiment,  we need to read temp. sensors in a much longer distance (than in our High-field or Low-field tests).

 

We found the Ansaldo circuit diagrams as attached (PDF).  Do you have any of these  circuit boards or PCB or anything to give us so that we do need to make them from scratch again ?

 

Kin

 

 

------ Original message------

From: Tallerico, Thomas N

Date: Tue, May 1, 2018 3:26 PM

To: Yip, Kin;

Cc: Danielson, Nils S;Masi Jr, Leonard;Nace II, David;

Subject:CLTS converter circuit to 4-20 ma signal.

 

Schematic attached, artwork attached and transmitter datasheet attached. Do they have any artwork or any circuit boards already made that they can send us.  See the CLTS sensor on the left of the schematic. Thanks Tom

 

Attachment: 20180504_180809.jpg
Description: 20180504_180809.jpg

Attachment: 20180504_180838.jpg
Description: 20180504_180838.jpg

Attachment: 20180501fr.pdf
Description: 20180501fr.pdf