Skip to Content.
Sympa Menu

sphenix-magnet-l - Re: [Sphenix-magnet-l] Something that you may do without the riggers ?

sphenix-magnet-l AT lists.bnl.gov

Subject: sPHENIX discussion of the superconducting solenoid

List archive

Chronological Thread  
  • From: "Yip, Kin" <kinyip AT bnl.gov>
  • To: "Orfin, Paul" <porfin AT bnl.gov>, "sphenix-magnet-l AT lists.bnl.gov" <sphenix-magnet-l AT lists.bnl.gov>
  • Subject: Re: [Sphenix-magnet-l] Something that you may do without the riggers ?
  • Date: Wed, 16 Jan 2019 16:24:43 +0000

Thanks !

On 1/16/19 11:11 AM, wrote:

All,

 

The take down of cryogenic and vacuum components has begun.  Let me know if there is any change in the schedule.  

 

Thank you,

Paul Orfin
Cryogenic Systems, Collider-Accelerator Department
Brookhaven National Laboratory
Telephone: (631) 344-2899

 

From: Yip, Kin
Sent: Tuesday, January 15, 2019 5:45 PM
To: Orfin, Paul <porfin AT bnl.gov>; Than, Yatming (Roberto) <ythan AT bnl.gov>
Cc: Phillips, David B <phillips AT bnl.gov>
Subject: For Paul: Something that you may do without the riggers ?

 

Hi Paul,

I realized that I addressed to the wrong person in my last version and so I do it again.

I'm not sure whether Dave has talked with you.

Dave and I talked this morning.  There are quite a few things to do disconnect before we can actually take out the Valvebox itself.
You may need riggers' help but are there anything that you may do (disconnecting pipes/valves or disconnecting/removing
some instrument) in the platform  without the riggers ?

Kin





  • Re: [Sphenix-magnet-l] Something that you may do without the riggers ?, Yip, Kin, 01/16/2019

Archive powered by MHonArc 2.6.24.

Top of Page