sPHENIX discussion of the superconducting solenoid

["Yip, Kin" <kinyip AT bnl.gov>]

Hi,

Paul Orfin has installed a bottom cover pipe (originally from BaBar) to seal the bottom of the Valve box (to prevent any more moisture to enter the system).  

Thanks !

Kin

-------- Original message --------

From: "Orfin, Paul" <porfin AT bnl.gov>

Date: 8/6/19 12:29 (GMT-05:00)

To: "Yip, Kin" <kinyip AT bnl.gov>, "Than, Yatming (Roberto)" <ythan AT bnl.gov>, "Phillips, David B" <phillips AT bnl.gov>, "Tallerico, Thomas N" <tallerico AT bnl.gov>, "Schultheiss, Carl" <carls AT bnl.gov>, "Ceruti, Raymond B" <rayc AT bnl.gov>

Cc: "Mills, James A" <mills AT bnl.gov>, "Streckenbach, Brian" <bstreckenbach AT bnl.gov>

Subject: RE: close the Valvebox ?

All,

 

Brain and I reviewed the cap.  I will use my technicians to close up the connection at the bottom of the valve box with the bolts Brain supplied. 

 

Is there any concern about stuffing the long cable lengths into the pipe cap?

 

Thank you,

Paul Orfin
Cryogenic Systems, Collider-Accelerator Department
Brookhaven National Laboratory
Telephone: (631) 344-2899

 

From: Yip, Kin <kinyip AT bnl.gov>
Sent: Wednesday, July 31, 2019 3:32 PM
To: Orfin, Paul <porfin AT bnl.gov>; Than, Yatming (Roberto) <ythan AT bnl.gov>; Phillips, David B <phillips AT bnl.gov>
Cc: Mills, James A <mills AT bnl.gov>; Streckenbach, Brian <bstreckenbach AT bnl.gov>
Subject: Re: close the Valvebox ?

 

Hi,

 

I have talked to Dave and he said he (or Brian) can help arrange the lift if it is necessary.

 

I think I have found the cover pipe --- which is not quite orange.  Please see the photos.  The pipe is not more than 32 inches and the distance from the floor to the bottom of Valve box is > 61 inches (see the 2nd photo).  I guess you don't need lifting ?!😁

 

Kin

Attachment: 20190806_173058.jpg
Description: 20190806_173058.jpg