sphenix-magnet-l AT lists.bnl.gov

Subject: sPHENIX discussion of the superconducting solenoid

List archive

Re: [Sphenix-magnet-l] Staging the sPHENIX magnet valve box in the 1008 AH

From: "Yip, Kin" <kinyip AT bnl.gov>
To: "Feder, Russell" <rfeder AT bnl.gov>, "Pontieri, Chris" <cpontieri AT bnl.gov>
Cc: "sphenix-magnet-l AT lists.bnl.gov" <sphenix-magnet-l AT lists.bnl.gov>, "Kobasiuk, Frederick D" <kobasiuk AT bnl.gov>, "Runyan, Christopher" <crunyan AT bnl.gov>
Subject: Re: [Sphenix-magnet-l] Staging the sPHENIX magnet valve box in the 1008 AH
Date: Fri, 3 Jun 2022 18:27:25 +0000

Hi,

I have just come to 912 and taken a couple pictures. Basically, it's just two concrete blocks and then two steel bars to sit on. We won't have the scaffoldings.

I measure that it's 4 ft x 10 ft(.5 inch). So, 5 ft x 11 ft may be enough 😀

Kin

-------- Original message --------

From: "Feder, Russell" <rfeder AT bnl.gov>

Date: 6/3/22 1:58 PM (GMT-05:00)

To: "Yip, Kin" <kinyip AT bnl.gov>, "Pontieri, Chris" <cpontieri AT bnl.gov>

Subject: Staging the sPHENIX magnet valve box in the 1008 AH

Kin

You mentioned the other day that you need some space on the 1008 AH to stage and prepare the magnet valve box when it is brought over from 912.

Can you give me a footprint for what space you need? How much 1008 AH floorspace do you need for this? Do you have any pictures of what you want to set up in the AH?

Russ

Russell Feder

Brookhaven National Lab

sPHENIX Chief Mechanical Engineer

https://www.linkedin.com/in/russell-feder-engineer-manager/

631-655-2491

Attachment: 20220603_141742.jpg
Description: 20220603_141742.jpg

Attachment: 20220603_141712.jpg
Description: 20220603_141712.jpg

Re: [Sphenix-magnet-l] Staging the sPHENIX magnet valve box in the 1008 AH, Yip, Kin, 06/03/2022
- Re: [Sphenix-magnet-l] Staging the sPHENIX magnet valve box in the 1008 AH, Toldo, Frank A, 06/03/2022
  - Re: [Sphenix-magnet-l] Staging the sPHENIX magnet valve box in the 1008 AH, Yip, Kin, 06/03/2022