sPHENIX discussion of the superconducting solenoid

["Tallerico, Thomas N" <tallerico AT bnl.gov>]

ok I’ll talk to everyone about this to confirm. Is the cable tray model being updated? Thanks Tom 

Get Outlook for iOS

---

From: sPHENIX-magnet-l <sphenix-magnet-l-bounces AT lists.bnl.gov> on behalf of Yip, Kin <kinyip AT bnl.gov>
Sent: Wednesday, July 6, 2022 4:31:30 PM
To: sphenix-magnet-l AT lists.bnl.gov <sphenix-magnet-l AT lists.bnl.gov>
Cc: Kowalski, Robert <rkowalski AT bnl.gov>; Karl, Robert F <rkarl AT bnl.gov>
Subject: Re: [Sphenix-magnet-l] East-Side Electrical Box framework

 

Hi,

 

Thanks Rob Kowalski !

 

Tom Tallerico :  It seems that there should be no restrictions between Rob Karl’s terminal box and Carl’s box, and also your lines/trays.  Please take a look.

 

Kin

 

From: Kowalski, Robert <rkowalski AT bnl.gov>
Sent: Wednesday, July 6, 2022 4:29 PM
To: Yip, Kin <kinyip AT bnl.gov>
Subject: East-Side Electrical Box framework

 

Hello Kin,

 

Below you will see a screenshot of my layout for that east-side corner of the platform.  The Electrical box I am currently using for space allotment is a 24” W x 28”H x 10” Deep box and it is about 7” away from the framework in question.  That box may move depending on the final location that would have to be coordinated with Rob Karl.   Currently in the model is roughly centered with the cutout in the decking.  Also attached is a general view which includes the equipment (mostly cryogenic) that I have been coordinating.

 

 

If you have any additional questions or requests, feel free to reach out at any time.

 

Best,

 

Robert Kowalski

Brookhaven National Laboratory

Collider-Accelerator Department

Upton, New York  11973

(631)344-7092

rkowalski AT bnl.gov