sphenix-maps-l AT lists.bnl.gov
Subject: sPHENIX MAPS tracker discussion
List archive
- From: "Ming Liu (ming AT bnl.gov)" <ming AT bnl.gov>
- To: Xin Dong <xdong AT lbl.gov>, sphenix-maps <sphenix-maps-l AT lists.bnl.gov>
- Subject: Re: [Sphenix-maps-l] Why do we need fast MAPS
- Date: Fri, 20 Jan 2017 16:55:04 -0700
Hi Xin,
Very nice work! One minor note, the currently proposed MAPS has the pixel size 28 x 28 um, not 20. I understand the effects are not large, but it would be nice to make the same study with the correct pixel size.
Cheers,
Ming
--
Ming Xiong Liu
P-25, MS H846 TEL: 505-667-7125
Physics Division 631-344-7821(BNL)
LANL 630-840-5708(FNAL)
Los Alamos, NM 87545 FAX: 505-665-7020
From: <sphenix-maps-l-bounces AT lists.bnl.gov> on behalf of Xin Dong <xdong AT lbl.gov>
Date: Friday, January 20, 2017 at 1:22 PM
To: sphenix-maps <sphenix-maps-l AT lists.bnl.gov>
Subject: [Sphenix-maps-l] Why do we need fast MAPS
Date: Friday, January 20, 2017 at 1:22 PM
To: sphenix-maps <sphenix-maps-l AT lists.bnl.gov>
Subject: [Sphenix-maps-l] Why do we need fast MAPS
Dear All,
Hybrid 1%X0, 50x425um per layer
MAPS 0.3%X0, 20x20um per layer
2) TPC+MAPS 0.3%X0, 20x20um per layer
two configurations, 20 micro-second and 200 micro-second integration time
_______________________________________________
sPHENIX-MAPS-l mailing list
sPHENIX-MAPS-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/sphenix-maps-l
To address this question more explicitly for the pre-proposal preparation, I did some calculations using the tool developed for STAR HFT based on the Billoir linearized Kalman filter method (see a bit detail in the Santa Fe presentation, and it shows consistent pointing resolutions w.r.t to the sPHENIX full GEANT simulation too
- courtesy of Jim Thomas and Howard Wiemann)
I tried the following two cases
1) TPC+MAPS vs. TPC+Hybrid
both are three silicon layers at r = 2.3, 3.2, 3.9cm Hybrid 1%X0, 50x425um per layer
MAPS 0.3%X0, 20x20um per layer
Then compare the pointing resolution from both cases.
two configurations, 20 micro-second and 200 micro-second integration time
Then compare the efficiency (good hit probability) for both cases under luminosity 100e26.
Please find the results here
I believe we can certainly do full GEANT simulation to verify too (takes some longer time). We can iterate with different choices with this method very quickly. Furthermore It should be able to guide us to set the requirement on detector performance parameters for the proposal.
Your comments are appreciated. Best Regards
/xin
-- ===========================
Xin Dong
Nuclear Science Division
Lawrence Berkeley National Lab
MS70R0319, One Cyclotron Road
Berkeley, CA 94720, USA
Tel: +1-510-486-4121
Email: XDong AT lbl.gov
===========================
Xin Dong
Nuclear Science Division
Lawrence Berkeley National Lab
MS70R0319, One Cyclotron Road
Berkeley, CA 94720, USA
Tel: +1-510-486-4121
Email: XDong AT lbl.gov
===========================
-
[Sphenix-maps-l] Why do we need fast MAPS,
Xin Dong, 01/20/2017
-
Re: [Sphenix-maps-l] Why do we need fast MAPS,
Ming Liu (ming AT bnl.gov), 01/20/2017
- Re: [Sphenix-maps-l] Why do we need fast MAPS, Xin Dong, 01/20/2017
-
Re: [Sphenix-maps-l] Why do we need fast MAPS,
Ming Liu (ming AT bnl.gov), 01/20/2017
Archive powered by MHonArc 2.6.24.