sPHENIX MAPS tracker discussion

[Martin Purschke <purschke AT bnl.gov>]

Dear all,

as I advertised at the coll. meeting, several detector systems can set 
up their own GL1/GTM unit during the commissioning phase.

In order to decouple the digitizer operations (that currently require a 
good amount of rebooting and re-configuring) from you guys, I rigged up 
a 2nd unit in the rack next to ebdc11. I used the spare 2nd ethernet 
port on ebcd11 to hook it up as mvtxgtm (aka 192.168.60.125) so once 
RunControl is running on the box it can get to it. (We don't want the 
units to be seen on the DAQ network for now).

I'm running out of time today; eventually we can join the existing 
daq01-connected 192.168.60.x network where the other units live with 
this one (IPs already set accordingly) and gain a gateway and DNS. And 
the unit still needs to see a bit of TLC with firmware versions and so on.

No fibers are connected yet and nothing has changed with any of your 
fibers yet; I'll coordinate with Jo and Yasser. But when we are done, 
each group can do their own thing without interference from the other.

Best,
        Martin


--
Martin L. Purschke, Ph.D.        ;   purschke AT bnl.gov
                                 ;   http://www.phenix.bnl.gov/~purschke
                                 ;
Brookhaven National Laboratory   ;   phone: +1-631-344-5244
Physics Department Bldg 510 C    ;   fax:   +1-631-344-3253
Upton, NY 11973-5000             ;   skype: mpurschke
-----------------------------------------------------------------------

Attachment: 20221228_181844.jpg
Description: JPEG image