sphenix-sepd-l AT lists.bnl.gov
Subject: sPHENIX Event Plane Detector discussion
List archive
Re: [sphenix-sepd-l] Summary of calo-workfest in Jan-Feb
- From: "Park, JaeBeom" <jpark4 AT bnl.gov>
- To: Rosi Reed <rosijreed AT lehigh.edu>
- Cc: "sphenix-sepd-l AT lists.bnl.gov" <sphenix-sepd-l AT lists.bnl.gov>
- Subject: Re: [sphenix-sepd-l] Summary of calo-workfest in Jan-Feb
- Date: Sun, 11 Feb 2024 23:35:15 +0000
Hello Rosi,
Apologies, I missed to reply.
I summarized the location of the total 5 boards (1 before + 4 new swapped from emcal) here under sheet “Location of bit flip boards” :
As we changed the configuration after the full installation of the electronics, I am not sure if this board has been used for the data taking before RHIC’s break.
If we can take pulse data with all of existing boards soon (not interfering other activities ongoing right now at 1008), we can demonstrate how to recover the shape of the signal for those channels. Pedestal runs can also be used to check those things.
Best,
Jaebeom
===============================
|| JaeBeom Park
|| Postdoctoral Associate
|| University of Colorado Boulder
|| E-mail : jpark4 AT bnl.gov
|| Phone : (934) 386-1466
===============================
|| JaeBeom Park
|| Postdoctoral Associate
|| University of Colorado Boulder
|| E-mail : jpark4 AT bnl.gov
|| Phone : (934) 386-1466
===============================
On Feb 6, 2024, at 8:04 PM, Rosi Reed <rosijreed AT lehigh.edu> wrote:
Hi JaeBeom,Ah, I see... So in your report, you have, "5 hardware problematic boards (bit flip) found : 4 in emcal / 1 in sepd". This 5th one isnt' in your table (which is the swapped ones), do you know which channel it was so I can compare it to the data we have. It would be very useful to know how to recover the channels as well.Regards,Rosi
On Tue, Feb 6, 2024 at 5:23 PM Park, JaeBeom <jpark4 AT bnl.gov> wrote:
Hi Rosi,
Sorry I missed your reply.So the boards listed in the table have each one channel that has this bit-flip problem and it is always that channel.Last year they were all in the emcal racks and now moved to the sepd crate in the slot numbers in the table.To add more info, the recovery works to flip that sample back. We can demonstrate how it works if needed.
Best,Jaebeom
===============================
|| JaeBeom Park
|| Postdoctoral Associate
|| University of Colorado Boulder
|| E-mail : jpark4 AT bnl.gov
|| Phone : (934) 386-1466
===============================
On Feb 5, 2024, at 8:20 PM, Rosi Reed <rosijreed AT lehigh.edu> wrote:
Hi JaeBeom,Thank you for this summary - which of these channels had the bit flip in last year's data? (Is it always the same bit that is flipped, or a different one in each board?)Cheers,Rosi
On Mon, Feb 5, 2024 at 5:36 PM Park, JaeBeom <jpark4 AT bnl.gov> wrote:
_______________________________________________Dear all,
Please find the summary of the 2 weeks (Jan 22th - Feb 2nd) calo-workfest below regarding calorimeter electronics related items.
Calorimeter electronics1) 19 new ADC boards installed in the emcal high-eta region (still missing final 13). Detailed location below : link2) New ADC initialization procedure using caloserver fixed bit shift problems (which made up the majority of problems in 2023 data)3) 5 hardware problematic boards (bit flip) found : 4 in emcal / 1 in sepd. The 4 boards in emcal were swapped with the good ADC boards in the sepd crate to avoid firing calo-triggers— Bit flipped channels are recoverable offline— Note to not zero-suppress these channels (now 5 in total for sepd— Detail location of boards :
Old location
New location
Rack Crate Slot Ch Idx Rack Crate Slot Ch Idx 1E3 2 1 30 E169257 3B2 1 5 30 E157822 1W1 1 18 8 E169323 3B2 1 4 8 E157850 1W3 1 7 30 E169302 3B2 1 8 30 E169446 1W3 1 19 29 E157844 3B2 1 7 29 E169255
4) No bit shift nor bit flip problems anymore in emcal & hcal.1 board in 1W1 having an issue on half of the channels and needs investigation.
5) New XMIT clock, event counter of 32-bit tested with the test stand in the rack room
— Further tests needed + discussions of reprogramming all XMITs (pulling out ~150 boards)
6) Plan to replace one backplane at 1W1/Crate 0 because of bent pin (Eric coordinating)
7) New PAR3, DCM2, jseb2-D boards, optical fibers & busy cables tested successfully
Extra kudos to Chi at Nevis!
8) New orders in place for ADC boards & trigger daughter cards
— 25 new ADC boards (not for this year, only likely in 2025) - Eric coordinating
— 50 new trigger daughter cards (for this year) - Eric coordinating
Best,Calo-workfest team
===============================
|| JaeBeom Park
|| Postdoctoral Associate
|| University of Colorado Boulder
|| E-mail : jpark4 AT bnl.gov
|| Phone : (934) 386-1466
===============================
sPHENIX-sEPD-l mailing list
sPHENIX-sEPD-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/sphenix-sepd-l
--
Rosi Reed
Associate Professor, Physics Department
Lehigh University
(610)758-3907
16 Memorial Drive East Office 406
Bethlehem, PA 18015
she/her/hers
--
Rosi Reed
Associate Professor, Physics Department
Lehigh University
(610)758-3907
16 Memorial Drive East Office 406
Bethlehem, PA 18015
she/her/hersClick here to sign up for an appointment
-
[sphenix-sepd-l] Summary of calo-workfest in Jan-Feb,
Park, JaeBeom, 02/05/2024
-
Re: [sphenix-sepd-l] Summary of calo-workfest in Jan-Feb,
Rosi Reed, 02/05/2024
-
Re: [sphenix-sepd-l] Summary of calo-workfest in Jan-Feb,
Park, JaeBeom, 02/06/2024
-
Re: [sphenix-sepd-l] Summary of calo-workfest in Jan-Feb,
Rosi Reed, 02/06/2024
- Re: [sphenix-sepd-l] Summary of calo-workfest in Jan-Feb, Park, JaeBeom, 02/11/2024
-
Re: [sphenix-sepd-l] Summary of calo-workfest in Jan-Feb,
Rosi Reed, 02/06/2024
-
Re: [sphenix-sepd-l] Summary of calo-workfest in Jan-Feb,
Park, JaeBeom, 02/06/2024
-
Re: [sphenix-sepd-l] Summary of calo-workfest in Jan-Feb,
Rosi Reed, 02/05/2024
Archive powered by MHonArc 2.6.24.