sphenix-software-l AT lists.bnl.gov

Subject: sPHENIX discussion of software

List archive

[Sphenix-software-l] new set of sHijing simulations

From: pinkenburg <pinkenburg AT bnl.gov>
To: "sphenix-software-l AT lists.bnl.gov" <sphenix-software-l AT lists.bnl.gov>
Subject: [Sphenix-software-l] new set of sHijing simulations
Date: Tue, 3 Oct 2017 14:55:10 -0400

Hi folks,

I made some changes to the hcals to get them close to the engineering drawings. This mainly affects the inner hcal which is thinner by about 0.15 interaction lengths. A short summary is on these slides>

https://indico.bnl.gov/materialDisplay.py?contribId=1&materialId=slides&confId=2713

I redid the sHijing simulations with this new default setup. The output is under

/sphenix/data/data02/baseline/sHijing

The rescoping simulations with this new setup are also finished by now, you'll find those under

/sphenix/data/data02/rescope-2017-09-08

A new round of single particle sims has been started for the usual particles/energies/eta ranges/field settings. It'll take a few days for that to finish. That output is under

/sphenix/sim/sim01/baseline/single_particle/spacal2d

Chris

--
*************************************************************

Christopher H. Pinkenburg ; pinkenburg AT bnl.gov
; http://www.phenix.bnl.gov/~pinkenbu

Brookhaven National Laboratory ; phone: (631) 344-5692
Physics Department Bldg 510 C ; fax: (631) 344-3253
Upton, NY 11973-5000

*************************************************************

[Sphenix-software-l] new set of sHijing simulations, pinkenburg, 10/03/2017