Skip to Content.
Sympa Menu

sphenix-software-l - Re: [Sphenix-software-l] qa_modules/QAG4SimulationCalorimeter.h error

sphenix-software-l AT lists.bnl.gov

Subject: sPHENIX discussion of software

List archive

Chronological Thread  
  • From: pinkenburg <pinkenburg AT bnl.gov>
  • To: Anthony Frawley <afrawley AT fsu.edu>, "sphenix-software-l AT lists.bnl.gov" <sphenix-software-l AT lists.bnl.gov>
  • Subject: Re: [Sphenix-software-l] qa_modules/QAG4SimulationCalorimeter.h error
  • Date: Tue, 30 Apr 2024 22:46:08 -0400

Hi Tony,

only saw this now - yes there is another macro with the bad path. I just copied the correct version in place (this time making sure there is no other one including qa_module/) and did a cvmfs release. Should be available in 15 minutes

It's fixed in the macros repo, so this shouldn't happen again

Chris


On 4/30/2024 10:03 PM, Anthony Frawley wrote:
Hi Chris,
Not quite. The macro G4_KFParticle.C still has:
#include <qa_modules/QAG4SimulationKFParticle.h>
when it should be:
#include <simqa_modules/QAG4SimulationKFParticle.h>
With that change, things run again.
But what is Jenkins running, that this got through?
Tony

From: sPHENIX-software-l <sphenix-software-l-bounces AT lists.bnl.gov> on behalf of pinkenburg via sPHENIX-software-l <sphenix-software-l AT lists.bnl.gov>
Sent: Tuesday, April 30, 2024 6:10 PM
To: sphenix-software-l AT lists.bnl.gov <sphenix-software-l AT lists.bnl.gov>
Subject: Re: [Sphenix-software-l] qa_modules/QAG4SimulationCalorimeter.h error
 
Hi Tony,

that one slipped through jenkins somehow. The location of this include has changed with the qa related work. I made a new build which should have this consistent again. It's being released right now, it'll be new.2 in about 15 minutes

Chris


On 4/30/2024 5:00 PM, Anthony Frawley via sPHENIX-software-l wrote:
Hi All,

F4All will presently not run, producing this error: /cvmfs/sphenix.sdcc.bnl.gov/gcc-12.1.0/release/release_new/new.1/rootmacros/G4_CEmc_Spacal.C:25:10: fatal error: 'qa_modules/QAG4SimulationCalorimeter.h' file not found #include <qa_modules/QAG4SimulationCalorimeter.h>
Is this a disconnect between the macros and repo code?
Tony
_______________________________________________
sPHENIX-software-l mailing list
sPHENIX-software-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/sphenix-software-l

-- 
*************************************************************

Christopher H. Pinkenburg	;    pinkenburg AT bnl.gov
				;    http://www.phenix.bnl.gov/~pinkenbu

Brookhaven National Laboratory	;    phone: (631) 344-5692
Physics Department Bldg 510 C	;    fax:   (631) 344-3253
Upton, NY 11973-5000

*************************************************************

-- 
*************************************************************

Christopher H. Pinkenburg	;    pinkenburg AT bnl.gov
				;    http://www.phenix.bnl.gov/~pinkenbu

Brookhaven National Laboratory	;    phone: (631) 344-5692
Physics Department Bldg 510 C	;    fax:   (631) 344-3253
Upton, NY 11973-5000

*************************************************************



Archive powered by MHonArc 2.6.24.

Top of Page