sphenix-tracking-l AT lists.bnl.gov
Subject: sPHENIX tracking discussion
List archive
Re: [Sphenix-tracking-l] Job Aborts due to Geometry Overlaps
- From: pinkenburg <pinkenburg AT bnl.gov>
- To: sphenix-tracking-l AT lists.bnl.gov
- Subject: Re: [Sphenix-tracking-l] Job Aborts due to Geometry Overlaps
- Date: Thu, 20 Apr 2017 10:18:50 -0400
Hi Christof, the addition of a small space between the strips only reduced the chance of overlaps to below a level where my testing didn't find them. I've been looking into this since yesterday but so far I can only say that there is something basically wrong somewhere (there is an issue in detecting this condition but doing this right still leaves overlaps on a lower level). Personally I doubt that it is on the G4 side, it's just unlikely that after 10+ years of development basic features like the parametrized volume have those kinds of simple problems. I removed the abort and rebuild the code to get you going again, the strips will probably show the displacement we have seen for the real overlaps. I hope that by later today I know what's going on here to fix this (rather than spending a lot of time patching it up to hide this issue) To get the new build you can just resource the sphenix setup script with -n source /opt/sphenix/core/bin/sphenix_setup.csh -n Chris On 4/20/2017 7:39 AM, Christof Roland
wrote:
Hi Everybody,
When testing the Kalman tracking I am getting a lot
of jobs aborted
due to geometry overlaps. The job abort with this
message:
Overlap detected in volume siactive_4_0pre and
post step point ot same volume for step status fGeomBoundary
WARNING - Attempt to delete the solid store while
geometry closed !
WARNING - Attempt to delete the logical volume
store while geometry closed !
WARNING - Attempt to delete the physical volume
store while geometry closed !
WARNING - Attempt to delete the region store while
geometry closed !
Has anybody seen this before?
I have put a set of macros using fixed random number
seeds to make
the problem reproducible in my afs public in case
anybody want to try:
/afs/rhic.bnl.gov/phenix/users/bogui/public/GeoOverlapIssue
Fun4All_G4_sPHENIX.C
G4Setup_sPHENIX.C
G4_Svtx_maps_ladders+intt_ladders+tpc_tony.C
Thanks for your input
Christof
_______________________________________________ sPHENIX-tracking-l mailing list sPHENIX-tracking-l AT lists.bnl.gov https://lists.bnl.gov/mailman/listinfo/sphenix-tracking-l -- ************************************************************* Christopher H. Pinkenburg ; pinkenburg AT bnl.gov ; http://www.phenix.bnl.gov/~pinkenbu Brookhaven National Laboratory ; phone: (631) 344-5692 Physics Department Bldg 510 C ; fax: (631) 344-3253 Upton, NY 11973-5000 ************************************************************* |
-
[Sphenix-tracking-l] Job Aborts due to Geometry Overlaps,
Christof Roland, 04/20/2017
- Re: [Sphenix-tracking-l] Job Aborts due to Geometry Overlaps, pinkenburg, 04/20/2017
Archive powered by MHonArc 2.6.24.