Skip to Content.
Sympa Menu

sphenix-tracking-l - Re: [Sphenix-tracking-l] Chip/Ladder mapping for INTT

sphenix-tracking-l AT lists.bnl.gov

Subject: sPHENIX tracking discussion

List archive

Chronological Thread  
  • From: Anthony Frawley <afrawley AT fsu.edu>
  • To: "sphenix-tracking-l AT lists.bnl.gov" <sphenix-tracking-l AT lists.bnl.gov>, "Bertaux, Joseph Tyler" <jbertau AT purdue.edu>
  • Subject: Re: [Sphenix-tracking-l] Chip/Ladder mapping for INTT
  • Date: Sat, 9 Jul 2022 15:18:39 +0000

Hello Joseph,

The machinery to do this already exists. The code is in the coresoftware repository:

    offline/packages/intt/CylinderGeomIntt

The code that fills in the details of the geometry class is in the detector construction class that builds the detector model:

   simulation/g4simulation/g4intt/PHG4InttDetector::AddGeometryNode()

It would help if I knew what you are trying to do. Let me know if you want to chat.

Tony


From: sPHENIX-tracking-l <sphenix-tracking-l-bounces AT lists.bnl.gov> on behalf of Bertaux, Joseph Tyler via sPHENIX-tracking-l <sphenix-tracking-l AT lists.bnl.gov>
Sent: Friday, July 8, 2022 5:45 PM
To: sphenix-tracking-l AT lists.bnl.gov <sphenix-tracking-l AT lists.bnl.gov>
Subject: [Sphenix-tracking-l] Chip/Ladder mapping for INTT
 
Hello all,

Sorry for the bulk email but I wanted to check; is there an existing or decided convention to map between chip/ladder ID to physical x, y, z coordinates where the hit occurred?

I wanted to approach this problem by writing a Fun4All code; is there a way to configure the output so that the hit location and ID are output commensurately for a particular detector?

Thank you,

Joseph



Archive powered by MHonArc 2.6.24.

Top of Page