star-fst-l AT lists.bnl.gov
Subject: Star-fst-l mailing list
List archive
Re: [Star-fst-l] FST-integration: dimensions of cables and cooling tubes
- From: "Capotosto, Michael" <capotosto AT bnl.gov>
- To: "Ye, Zhenyu" <yezhenyu AT uic.edu>, "star-fst-l AT lists.bnl.gov" <star-fst-l AT lists.bnl.gov>
- Subject: Re: [Star-fst-l] FST-integration: dimensions of cables and cooling tubes
- Date: Wed, 31 Jul 2019 19:00:24 +0000
Zhenyu,
If we purchase cable from KC Electronics, it will have a nominal diameter of
0.298", maximum of 0.320". If purchased through Allied Electronics, the spec
listed is 0.270" nominal, with a maximum of 0.285".
I can't speak to the other details.
--Mike
-----Original Message-----
From: Star-fst-l <star-fst-l-bounces AT lists.bnl.gov> On Behalf Of Ye, Zhenyu
Sent: Wednesday, July 31, 2019 1:58 PM
To: star-fst-l AT lists.bnl.gov
Subject: [Star-fst-l] FST-integration: dimensions of cables and cooling tubes
Hi Mike, Yi,
Can you please provide the mechanical information (number, diameter) of the
inner signal cables between the FST disks and Patch Panel boards, and that of
the cooling tubes between the FST disks and cooling manifold on the TPC
end-cap?
Thanks,
Zhenyu
_______________________________________________
Star-fst-l mailing list
Star-fst-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/star-fst-l
-
[Star-fst-l] FST-integration: dimensions of cables and cooling tubes,
Ye, Zhenyu, 07/31/2019
- Re: [Star-fst-l] FST-integration: dimensions of cables and cooling tubes, Capotosto, Michael, 07/31/2019
Archive powered by MHonArc 2.6.24.