Star-fst-l mailing list

["Ye, Zhenyu" <yezhenyu AT uic.edu>]

Hi Rahul,

Cables:
Qty 36
Diameter 0.32 inch

Cooling tubes:
Qty 24
Diameter 0.25 inch

Thanks,
Zhenyu

> On Aug 19, 2019, at 5:27 PM, Sharma, Rahul <rsharma AT bnl.gov> wrote:
> 
> Hi Zhenyu,
> 
> Can you please summarize the no. and diameter of cooling tubes and cables 
> in an email for John to lay it out.
> 
> - Rahul
> 
> -----Original Message-----
> From: Star-fst-l <star-fst-l-bounces AT lists.bnl.gov> On Behalf Of Gerard 
> Visser
> Sent: Monday, August 05, 2019 10:46 AM
> To: star-fst-l AT lists.bnl.gov
> Subject: Re: [Star-fst-l] FST-integration: dimensions of cables and cooling 
> tubes
> 
> hi Rahul,
>       And so how does this look on the mechanical integration? Is there a 
> sketch available with the cables and cooling tubes passing outer detector 
> disk?
> 
>       - Gerard
> 
> 
> On 7/31/2019 3:00 PM, Capotosto, Michael wrote:
>> Zhenyu,
>> 
>> If we purchase cable from KC Electronics, it will have a nominal diameter 
>> of 0.298", maximum of 0.320". If purchased through Allied Electronics, the 
>> spec listed is 0.270" nominal, with a maximum of 0.285".
>> 
>> I can't speak to the other details.
>> 
>> --Mike
>> 
>> -----Original Message-----
>> From: Star-fst-l <star-fst-l-bounces AT lists.bnl.gov> On Behalf Of Ye, 
>> Zhenyu
>> Sent: Wednesday, July 31, 2019 1:58 PM
>> To: star-fst-l AT lists.bnl.gov
>> Subject: [Star-fst-l] FST-integration: dimensions of cables and 
>> cooling tubes
>> 
>> Hi Mike, Yi,
>> 
>> Can you please provide the mechanical information (number, diameter) of 
>> the inner signal cables between the FST disks and Patch Panel boards, and 
>> that of the cooling tubes between the FST disks and cooling manifold on 
>> the TPC end-cap?
>> 
>> Thanks,
>> Zhenyu
> _______________________________________________
> Star-fst-l mailing list
> Star-fst-l AT lists.bnl.gov
> https://lists.bnl.gov/mailman/listinfo/star-fst-l