Star-fst-l mailing list

[Zhenyu Ye <yezhenyu2003 AT gmail.com>]

At the Forward upgrade meeting today, Rahul mentioned that, based on the info 
he has (number of cables and cooling tubes and their dimensions), there is 
probably room for larger cables. (See the attached pdf file).

Zhenyu

Attachment: FullAssembly 8-20-19 BNL acad-Model.pdf
Description: Adobe PDF document

> On Aug 5, 2019, at 9:46 AM, gerard visser <gvisser AT indiana.edu> wrote:
> 
> hi Rahul,
>       And so how does this look on the mechanical integration? Is there a 
> sketch available with the cables and cooling tubes passing outer detector 
> disk?
> 
>       - Gerard
> 
> 
> On 7/31/2019 3:00 PM, Capotosto, Michael wrote:
>> Zhenyu,
>> If we purchase cable from KC Electronics, it will have a nominal diameter 
>> of 0.298", maximum of 0.320". If purchased through Allied Electronics, the 
>> spec listed is 0.270" nominal, with a maximum of 0.285".
>> I can't speak to the other details.
>> --Mike
>> -----Original Message-----
>> From: Star-fst-l <star-fst-l-bounces AT lists.bnl.gov> On Behalf Of Ye, Zhenyu
>> Sent: Wednesday, July 31, 2019 1:58 PM
>> To: star-fst-l AT lists.bnl.gov
>> Subject: [Star-fst-l] FST-integration: dimensions of cables and cooling 
>> tubes
>> Hi Mike, Yi,
>> Can you please provide the mechanical information (number, diameter) of 
>> the inner signal cables between the FST disks and Patch Panel boards, and 
>> that of the cooling tubes between the FST disks and cooling manifold on 
>> the TPC end-cap?
>> Thanks,
>> Zhenyu
> _______________________________________________
> Star-fst-l mailing list
> Star-fst-l AT lists.bnl.gov
> https://lists.bnl.gov/mailman/listinfo/star-fst-l