Star-fst-l mailing list

[Gerard Visser <gvisser AT indiana.edu>]

hi all,
	Just to clarify about the patchpanel assemblies, I think the 12-pack exactly as 
seen in fig 4 picture is what we want, let us not change that plan. We have (or 
had) three ready to install, right? (One having been cannibalized for the test 
stands but should be no problem to resaaemble. They can mount same way was they 
were for IST, same mounting holes to TPC wheel, I assume they will clear the 
iTPC FEE (TBC). As I recall the baseplate is *not* insulated from the TPC wheel, 
rather it is purposely connected this is the detector ground connection.
        Sincerely,

                Gerard


p.s. We should find some good pictures of the PPB asseblies in the IST 
installation, for reference. I have a few though they may not show enough views, 
hope others may have some.


On 3/25/2020 10:41 AM, flemming videbaek wrote:
> Dear Rahul and John,
>
> attached is the short document I wrote in regard to services that is needed 
> for FST;  Please read it and send your comments, questions and concerns to 
> the list.
> I will update the document as needed.
>
>
>
> The document is also available on
> https://drupal.star.bnl.gov/STAR/system/files/FST%20services.pdf
>
>
> Flemming Videbaek
> senior scientist
> videbaek @ bnl.gov
> Brookhaven National Lab
> Physics Department
> Bldg 510D
> Upton, NY 11973
>
> phone: 631-344-4106
> cell     :  631-681-1596
>
>
>
>
>
>
> _______________________________________________
> Star-fst-l mailing list
> Star-fst-l AT lists.bnl.gov
> https://lists.bnl.gov/mailman/listinfo/star-fst-l