Skip to Content.
Sympa Menu

star-fst-l - Re: [Star-fst-l] FST Online ZS document

star-fst-l AT lists.bnl.gov

Subject: Star-fst-l mailing list

List archive

Chronological Thread  
  • From: Xu Sun <sunxuhit AT gmail.com>
  • To: videbaek <videbaek AT bnl.gov>
  • Cc: Star-fst L <star-fst-l AT lists.bnl.gov>
  • Subject: Re: [Star-fst-l] FST Online ZS document
  • Date: Mon, 23 Aug 2021 15:19:49 -0400

Hi Flemming,

Sorry for the very late reply. I somehow missed this email.

Please find my reply below:
> a) For the CMN calculation you take a sum in a group over non hit channels?
> What is the decision for not having a hit? I assume it is adc value of pedestal+some range ofCMN noise.
A: Yes, we take a sum in a group with no hits.
For the decision of hit channel:
1. Loop over all the channels in the group and calculate the mean and RMS for each channel.
2. Select the channel with adc < mean + 3.0*RMS and use those channels to calculate the CMN of this group.

> b) There should be a description how many times bins are considered in calculation, and if pedestal e.g depends on bin or not
A: for the current DAQ test, we have 9 time bins and the pedestal/CMN should be calculated for each time bin.

> c) How many time bins should be kept?
A: for IST, there were 4 time bins kept. My guess is the same 4 time bins should be also sufficient for FST.

Best,

Xu



On Tue, Aug 3, 2021 at 4:40 PM videbaek <videbaek AT bnl.gov> wrote:
Hi Xu,

I have two questions/comments where you should clarify the algoritm or
conditions
based on work earlier.

a) For the CMN calculation you take a sum in a group over non hit
channels?
What is the decision for not having a hit? I assume it is adc value of
pedestal+some range ofCMN noise.

b) There should be a description how many times bins are considered in
calculation, and if pedestal e.g depends on bin or not.

c) How many time bins should be kept?


bet Flemming

On 2021-08-03 09:43, Xu Sun wrote:
> Hi Tonko,
>
> We have prepared a document about how to calculate/subtract the common
> mode noise in the online ZS DAQ.
> Please find it in the following link:
> https://drive.google.com/file/d/1qsd1Uy71ARPRlVVw9GImlvAac9rTlxv9/view?usp=sharing
> [1]
>
> Comments and suggestions are welcome.
> Please let us know what we could help to implement this to the DAQ
> software.
>
> Best,
>
> Xu
>
> Links:
> ------
> [1]
> https://urldefense.com/v3/__https://drive.google.com/file/d/1qsd1Uy71ARPRlVVw9GImlvAac9rTlxv9/view?usp=sharing__;!!P4SdNyxKAPE!SYbPJlMfRzEwwZGlh3SGXO7K5XqueHjMtgCJEi1gh7QjADFyYN-XL6sEjRaU7wrUPtV0C7c$
> _______________________________________________
> Star-fst-l mailing list
> Star-fst-l AT lists.bnl.gov
> https://lists.bnl.gov/mailman/listinfo/star-fst-l

--
Flemming Videbaek
senior scientist
videbaek @ bnl.gov
Brookhaven National Lab
Physics Department
Bldg 510D
Upton, NY 11973

phone: 631-344-4106
cell     :  631-681-1596



Archive powered by MHonArc 2.6.24.

Top of Page