Skip to Content.
Sympa Menu

star-fwd-software-l - Re: [Star-fwd-software-l] StFcsTriggerSimMaker update

star-fwd-software-l AT lists.bnl.gov

Subject: FWD Software

List archive

Chronological Thread  
  • From: Akio Ogawa <akio AT bnl.gov>
  • To: "star-fwd-software-l AT lists.bnl.gov" <star-fwd-software-l AT lists.bnl.gov>
  • Subject: Re: [Star-fwd-software-l] StFcsTriggerSimMaker update
  • Date: Tue, 21 Nov 2023 11:55:09 -0500 (EST)

Hello

Okey. I finally found the cause of the problem Manny was seeing in
StFcsTriggerSimMaker. Please see

https://github.com/star-bnl/star-sw/pull/630

or

/star/u/akio/fcs20231121/star-sw/StRoot/StFcsDbMaker/StFcsDb.cxx

Some of init code in StFcsDb had to be moveed from Init() to InitRun() since it requires offset tables loaded first from DB in InitRun() of StFcsDbMaker. ET gain from ET gainfile were overwrittenb by one with
wrong detector offsets, getting crazy high gain factors (x5~x10), thus most of MB events were triggering.

"ET gain" calc needs xyz offsets of the detector. This ET gains are not really used in analysis since recorded data is E matched. ET gain calculated here are installed on DEP, and used in trigger algo. I think only offline code using ET gain is the StFcsTiggerSimMaker.

Please teke this and see if this now make sense.

OGAWA, akio Email : akio AT bnl.gov
BrookHaven National Lab. Physics Dep. 510A 2-235
Upton, NY, 11973-5000 Tel. 631-344-5293

On Wed, 1 Nov 2023, Akio Ogawa wrote:

Hello

I promised to look at StFcsTriggerSimMaker for MC. I think I made
it work at

rcas60xx:/star/u/akio/fcsmc202311/star-sw/
runSimBfc.C
StRoot/StSpinPool/StFcsTriggerSimMaker/*.*
StRoot/StSpinPool/StFcsTriggerSimMaker/files/*.txt

which has updated code as well as needed text files.

Please use TrgVersion = 202209 for run22 and beyond.

fcsTrgSim->setTrigger(202209);

My old instruction

https://www.star.bnl.gov/protected/spin/akio/fcs/howto_MC_github.html

seems to still wrok fine with a bit of addition of copying files
into your working dir

cp StRoot/StSpinPool/StFcsTriggerSimMaker/files/*.txt .

PR#618 is up with all changes

https://github.com/star-bnl/star-sw/pull/618

So until this goes through, you need to copy the code from my dir
or my github repo for the PR above.

I checked basics, but I have not run it with large statistics and
saw dostributions from QA. Please let me know if this make sense
or not!

OGAWA, akio Email : akio AT bnl.gov
BrookHaven National Lab. Physics Dep. 510A 2-235
Upton, NY, 11973-5000 Tel. 631-344-5293





Archive powered by MHonArc 2.6.24.

Top of Page