eic-projdet-pfrich-l AT lists.bnl.gov
Subject: ePIC pfRICH mailing list
List archive
Re: [Eic-projdet-pfrich-l] FTDM 2024 conference : pfRICH prototyping efforts poster
- From: "Kiselev, Alexander" <ayk AT bnl.gov>
- To: Sushrut Karmarkar <skarmar AT purdue.edu>, "epic-talks-l AT lists.bnl.gov" <epic-talks-l AT lists.bnl.gov>, "Kiselev, Alexander via Eic-projdet-pfrich-l" <eic-projdet-pfrich-l AT lists.bnl.gov>
- Cc: "Zurek, Maria" <zurek AT anl.gov>, Alex Eslinger <eslinger AT jlab.org>, "Jung, Andreas" <anjung AT purdue.edu>, "wenliang.li AT stonybrook.edu" <wenliang.li AT stonybrook.edu>, Charles Joseph Naim <charlesjoseph.naim AT stonybrook.edu>, "Snydersmith, Simon Roger" <snyderss AT purdue.edu>
- Subject: Re: [Eic-projdet-pfrich-l] FTDM 2024 conference : pfRICH prototyping efforts poster
- Date: Tue, 21 May 2024 22:29:14 +0000
Dear Sushrut,
I think the poster is good as is and does not require further substantial modifications. I'd use space at the bottom to mention that the first ring (or both of them by next week?) were built already and a final assembly is being planned for August this year.
Unless it is too late, I'd however suggest to change "prototyping" to "engineering design" in the title, as well as elsewhere in the text (abstract, Figures 7 & 8; one can use "manufacturing", "first article" wording as well), just to avoid unnecessary complications.
Cheers,
Alexander.
From: Sushrut Karmarkar <skarmar AT purdue.edu>
Sent: Tuesday, May 21, 2024 11:31 AM
To: epic-talks-l AT lists.bnl.gov <epic-talks-l AT lists.bnl.gov>; Kiselev, Alexander via Eic-projdet-pfrich-l <eic-projdet-pfrich-l AT lists.bnl.gov>
Cc: Zurek, Maria <zurek AT anl.gov>; Alex Eslinger <eslinger AT jlab.org>; Kiselev, Alexander <ayk AT bnl.gov>; Jung, Andreas <anjung AT purdue.edu>; wenliang.li AT stonybrook.edu <wenliang.li AT stonybrook.edu>; Charles Joseph Naim <charlesjoseph.naim AT stonybrook.edu>; Snydersmith, Simon Roger <snyderss AT purdue.edu>
Subject: FTDM 2024 conference : pfRICH prototyping efforts poster
Sent: Tuesday, May 21, 2024 11:31 AM
To: epic-talks-l AT lists.bnl.gov <epic-talks-l AT lists.bnl.gov>; Kiselev, Alexander via Eic-projdet-pfrich-l <eic-projdet-pfrich-l AT lists.bnl.gov>
Cc: Zurek, Maria <zurek AT anl.gov>; Alex Eslinger <eslinger AT jlab.org>; Kiselev, Alexander <ayk AT bnl.gov>; Jung, Andreas <anjung AT purdue.edu>; wenliang.li AT stonybrook.edu <wenliang.li AT stonybrook.edu>; Charles Joseph Naim <charlesjoseph.naim AT stonybrook.edu>; Snydersmith, Simon Roger <snyderss AT purdue.edu>
Subject: FTDM 2024 conference : pfRICH prototyping efforts poster
Dear pfRICH collaborators,
For the upcoming Forum on Tracking Detector Mechanics scheduled for 29 to 31 May, the undergraduate students working on the end ring and sensor plane prototypes at Purdue University under guidance from Dr. Jung and I are presenting a poster.
Please find attached the final draft of the poster for your review. We would really appreciate your inputs, comments and suggestions for changes to make the poster better.
Thank you
Sincerely,
Sushrut
--------------------------------------------------------------------
Sushrut Karmarkar | Associate Research Engineer
Composites Manufacturing and Simulation Center; and
Interfacial
Multiphysics Lab.
Purdue University, West Lafayette, USA.
Contact: +1-646-752-9770 | skarmar AT purdue.edu
--------------------------------------------------------------------
-
[Eic-projdet-pfrich-l] FTDM 2024 conference : pfRICH prototyping efforts poster,
Sushrut Karmarkar, 05/21/2024
- Re: [Eic-projdet-pfrich-l] FTDM 2024 conference : pfRICH prototyping efforts poster, Kiselev, Alexander, 05/21/2024
Archive powered by MHonArc 2.6.24.