sPHENIX EMCal discussion

["Huang, Jin" <jhuang AT bnl.gov>]

I think that is the common password used for the wiki.

 

Cheers

 

Jin

 

______________________________

 

Jin HUANG

 

Associate Physicist

Brookhaven National Laboratory

Physics Department, Bldg 510 C

Upton, NY 11973-5000

 

Office: 631-344-5898

Cell:   757-604-9946

______________________________

 

From: sPHENIX-EMCal-l <sphenix-emcal-l-bounces AT lists.bnl.gov> On Behalf Of Zhaozhong Shi
Sent: Wednesday, September 12, 2018 11:01 AM
To: Stoll, Sean <stoll AT bnl.gov>; sphenix-emcal-l AT lists.bnl.gov
Subject: Re: [Sphenix-emcal-l] Block Configuration for the 2018 Test Beam Run

 

Hi,

 

I actually found the link for the tower IDs:

 

https://docdb.sphenix.bnl.gov/cgi-bin/private/ShowDocument?docid=121

 

But my login the username and password fails. Do you know the login? Thank you!

 

Sincerely,

Zhaozhong Shi

 

 

 

-------------------------------------------

NSF GRFP Fellow

MIT Physics PhD Candidate

Building 24-407

77 Massachusetts Avenue, 

Cambridge, MA 02139

zzshi AT mit.edu

-------------------------------------------

---

From: sPHENIX-EMCal-l [sphenix-emcal-l-bounces AT lists.bnl.gov] on behalf of Zhaozhong Shi [zzshi AT mit.edu]
Sent: Wednesday, September 12, 2018 10:56 AM
To: Sean Stoll; sphenix-emcal-l AT lists.bnl.gov
Subject: Re: [Sphenix-emcal-l] Block Configuration for the 2018 Test Beam Run

Hi Sean,

 

Thanks for the plot. I wonder if you have the tower ID for the blocks? Thank you!

 

Sincerely,

Zhaozhong Shi

 

-------------------------------------------

NSF GRFP Fellow

MIT Physics PhD Candidate

Building 24-407

77 Massachusetts Avenue, 

Cambridge, MA 02139

zzshi AT mit.edu

-------------------------------------------

---

From: Sean Stoll [stoll AT bnl.gov]
Sent: Wednesday, September 12, 2018 10:52 AM
To: Zhaozhong Shi; sphenix-emcal-l AT lists.bnl.gov
Subject: Re: Block Configuration for the 2018 Test Beam Run

Hi Zhaozhong,

I collaged together the individual block photos into their positions in the V2.1 prototype.

Note that this is not a single photo of the actual stack of blocks, so the gaps shown between the blocks are not representative of what exists in the V2.1 prototype.

Slide 1 shows a stack-up of blocks, in a rectangular arrangement. That is closer to what actual block-block boundaries look like.

 

Sean

 

On 9/10/2018 4:23 AM, Zhaozhong Shi wrote:

Hi Sean,

 

Do you have the block configuration for the 2018 test beam run just like this one in the 2017 test beam run? Thank you very much!

 

Sincerely,

Zhaozhong Shi

-- 

Sean Stoll

Physics Associate

Brookhaven Nat. Lab

Upton, NY 11973

631.344.5331