sphenix-emcal-l AT lists.bnl.gov

Subject: sPHENIX EMCal discussion

List archive

Re: [Sphenix-emcal-l] Block Configuration for the 2018 Test Beam Run

From: Sean Stoll <stoll AT bnl.gov>
To: Zhaozhong Shi <zzshi AT mit.edu>, sphenix-emcal-l AT lists.bnl.gov
Subject: Re: [Sphenix-emcal-l] Block Configuration for the 2018 Test Beam Run
Date: Wed, 12 Sep 2018 10:52:05 -0400

Hi Zhaozhong,

I collaged together the individual block photos into their positions in the V2.1 prototype.

Note that this is not a single photo of the actual stack of blocks, so the gaps shown between the blocks are not representative of what exists in the V2.1 prototype.

Slide 1 shows a stack-up of blocks, in a rectangular arrangement. That is closer to what actual block-block boundaries look like.

Sean

On 9/10/2018 4:23 AM, Zhaozhong Shi wrote:

Hi Sean,

Do you have the block configuration for the 2018 test beam run just like this one in the 2017 test beam run? Thank you very much!

Sincerely,

Zhaozhong Shi

-- 
Sean Stoll
Physics Associate
Brookhaven Nat. Lab
Upton, NY 11973
631.344.5331

Attachment: V2-1_block_positions2.pdf
Description: Adobe PDF document

Re: [Sphenix-emcal-l] Block Configuration for the 2018 Test Beam Run, Sean Stoll, 09/12/2018
- Re: [Sphenix-emcal-l] Block Configuration for the 2018 Test Beam Run, Zhaozhong Shi, 09/12/2018
  - Re: [Sphenix-emcal-l] Block Configuration for the 2018 Test Beam Run, Zhaozhong Shi, 09/12/2018
    - Re: [Sphenix-emcal-l] Block Configuration for the 2018 Test Beam Run, Huang, Jin, 09/12/2018