Skip to Content.
Sympa Menu

sphenix-hcal-l - Re: [Sphenix-hcal-l] Calibration problems in t1044 HCal data

sphenix-hcal-l AT lists.bnl.gov

Subject: sPHENIX HCal discussion

List archive

Chronological Thread  
  • From: Abhisek Sen <sen.abhisek AT gmail.com>
  • To: Edouard Kistenev <kistenev AT bnl.gov>
  • Cc: sphenix-hcal-l AT lists.bnl.gov
  • Subject: Re: [Sphenix-hcal-l] Calibration problems in t1044 HCal data
  • Date: Mon, 14 Nov 2016 17:42:17 +0000

They are taken just before T1044. All measurements are done within first two weeks of April 2016.

Cheers,
Abhisek

On Mon, Nov 14, 2016 at 11:55 AM Edouard Kistenev <kistenev AT bnl.gov> wrote:
Thanks, Abhisek. Any chance that we have dates of the data taking.
Edward


On Nov 14, 2016, at 11:34 AM, Abhisek Sen <sen.abhisek AT gmail.com> wrote:

Hi Edward,
  Here is my log. Can you compare with these?

Cheers,
Abhisek



On Mon, Nov 14, 2016 at 11:12 AM John Lajoie <lajoie AT iastate.edu> wrote:

Hi Edward,

    Ugh - this sounds ugly.

    Since we have an HCAL meeting this week, it seems like that might be a good time to discuss this as a group?  Would it be possible for you to make a few slides with your test results to lead the discussion?

John


On 11/14/2016 9:38 AM, Edouard Kistenev wrote:
Hi, Megan, Abhisek and everyone,
just before the tiles were extracted from t1044 prototype I took few runs with self- and external- cosmic triggers in HInner and HOuter. While HOuter looks reasonably stable between run 2029 (April 11) and now (one tower is different by x2), the changes to mu-peaks in HInner are too random to explain by for example global change in applyied bias. 
All tiles are already on the desk in HB - I am sure you know how to find those which belong to specific towers and reestablish the ordering - please help - I would like to have a closer look on outliers. 
	
The first one to see is #6 (2/1) in HOuter, maybe (0/0 and 2/0) in HInner (first moved up by x1.5 second down by the same factor). 

We would also need to pay more attention to the gain of electronics - probably need someone to look into preamp gains at least in towers which changed the mu-peaks too much. It is simple - find single pixel value connecting different preamps to the same SiPM (maybe to different inputs on bad preamps if found).

			Edward 
_______________________________________________
Sphenix-hcal-l mailing list
Sphenix-hcal-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/sphenix-hcal-l

--

John Lajoie
Professor of Physics
Iowa State University

 

Facebook LinkedIn
Contact me: Skype john.lajoie
_______________________________________________
Sphenix-hcal-l mailing list
Sphenix-hcal-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/sphenix-hcal-l
<calibration_ratio.xlsx>_______________________________________________



Archive powered by MHonArc 2.6.24.

Top of Page