sphenix-hcal-l AT lists.bnl.gov

Subject: sPHENIX HCal discussion

List archive

[Sphenix-hcal-l] Gain Factors in HCal Simulation

From: Megan Connors <meganeconnors AT gmail.com>
To: "Huang, Jin" <jhuang AT bnl.gov>, John Haggerty <haggerty AT bnl.gov>, sphenix-hcal-l AT lists.bnl.gov
Subject: [Sphenix-hcal-l] Gain Factors in HCal Simulation
Date: Thu, 24 Mar 2022 17:01:46 -0400

Hi Jin and John,

I'm hoping you can help clarify a question that came up during the calibration meeting today. Shuhang showed the slide below that includes a 5/16 factor. I believe the 5 comes from the single pixel peak of 5 ADC we measured. The 16 is the factor between high and low gain. The test beam paper we state that the factor is 16 for the outer HCal and 32 for inner. Now that factor is 32 for both inner and Outer electronics. My conclusion is that we need to update this factor to 32 for outer HCal in the outer HCal simulation. Does this all sound correct to you? Any other insight to these factors in the simulation are appreciated.

Best,

-Megan

[Sphenix-hcal-l] Gain Factors in HCal Simulation, Megan Connors, 03/24/2022
- Re: [Sphenix-hcal-l] Gain Factors in HCal Simulation, Huang, Jin, 03/24/2022