sphenix-magnet-l AT lists.bnl.gov

Subject: sPHENIX discussion of the superconducting solenoid

List archive

Re: [Sphenix-magnet-l] BaBar SOLENOID ROOM TEMPERATURE LEAK CHECK

From: "Than, Yatming (Roberto)" <ythan AT bnl.gov>
To: "Yip, Kin" <kinyip AT bnl.gov>, "Haggerty, John" <haggerty AT bnl.gov>, "sphenix-magnet-l AT lists.bnl.gov" <sphenix-magnet-l AT lists.bnl.gov>, "Anerella, Michael D" <mda AT bnl.gov>, "Tuozzolo, Joseph E" <tuozzolo AT bnl.gov>, "Gaffney, Michael" <gaffney AT bnl.gov>
Subject: Re: [Sphenix-magnet-l] BaBar SOLENOID ROOM TEMPERATURE LEAK CHECK
Date: Thu, 12 Mar 2015 20:26:55 +0000

Mike,
Kin had a meeting with Ed Lessard.
To proceed with leak check at 81 psig we would require the following:

ANSALDO Paperwork that says what the design pressure is. I think I did see a
pressure test form when I browsed through the binders.
I will browse through the binders tomorrow morning.
Reliefs for the helium supply side.
Relief plate on the vacuum vessel.
Review with safety committee members Ed Lessard, Tuozzolo, Gaffney, and me.

Thanks, Roberto

Re: [Sphenix-magnet-l] BaBar SOLENOID ROOM TEMPERATURE LEAK CHECK, Than, Yatming (Roberto), 03/12/2015
- Re: [Sphenix-magnet-l] BaBar SOLENOID ROOM TEMPERATURE LEAK CHECK, Than, Yatming (Roberto), 03/12/2015