sphenix-magnet-l AT lists.bnl.gov

Subject: sPHENIX discussion of the superconducting solenoid

List archive

[Sphenix-magnet-l] Axial Tie Rod Information

From: "Mills, James A" <mills AT bnl.gov>
To: "Giannotti, Paul" <gia AT bnl.gov>, "Anerella, Michael D" <mda AT bnl.gov>, "Hock, Jonathan" <jhock AT bnl.gov>, "Lynch, Don" <dlynch AT bnl.gov>
Cc: "Cozzolino, John" <cozz AT bnl.gov>, "sphenix-magnet-l AT lists.bnl.gov" <sphenix-magnet-l AT lists.bnl.gov>
Subject: [Sphenix-magnet-l] Axial Tie Rod Information
Date: Fri, 12 Feb 2016 15:05:38 +0000

Hi Mike, Jon, Don and Paul,

This is the axial tie rod information I was telling you about yesterday morning at our engineering meeting. It is part of the Acceptance Test data in one of the 3-ring binders. Along with this is a paper that was in the folder and also sent to me via email on Monday by Walt Sondheim that uses the same data.

I have also found two tables that were in the conceptual design report that may give us some insight into the design parameters they used for the coil and mandrel.

Also included are two documents, one of which you may or may not have seen already at Kin’s website. This was a study done by R. P. Smith for the D0 Superconductor. The second document is a material data sheet that Jon sent me on an aluminum alloy, 1060, that is considered a commercially pure aluminum alloy.

Have a nice weekend,

Jim

Attachment: Axial Tie-Rods.pdf
Description: Axial Tie-Rods.pdf

Attachment: Mechanical_Properties.pdf
Description: Mechanical_Properties.pdf

Attachment: Babar-magnet-design-1998oc.doc
Description: Babar-magnet-design-1998oc.doc

Attachment: ACF507D.PDF
Description: ACF507D.PDF

Attachment: Aluminum_Stabalizer_for_D0_Superconductor.pdf
Description: Aluminum_Stabalizer_for_D0_Superconductor.pdf

[Sphenix-magnet-l] Axial Tie Rod Information, Mills, James A, 02/12/2016
- Re: [Sphenix-magnet-l] Axial Tie Rod Information, Kin Yip, 02/12/2016
  - Re: [Sphenix-magnet-l] Axial Tie Rod Information, Mills, James A, 02/12/2016