List archive

• 16/02/01
  • [Sphenix-magnet-l] Almost done ... roughing pump to be turned on .... all depend on P. Talty at the end, Kin Yip
• 16/02/02
  • [Sphenix-magnet-l] sPHENIX Magnet meeting on Feb. 3 at 1:30 pm in the 902 conference room, Yip, Kin
  • [Sphenix-magnet-l] ohm to temperature (K), Kin Yip
  • Re: [Sphenix-magnet-l] sPHENIX Magnet meeting on Feb. 3 at 1:30 pm in the 902 conference room, Giannotti, Paul
  • Re: [Sphenix-magnet-l] sPHENIX Magnet meeting on Feb. 3 at 1:30 pm in the 902 conference room, Yip, Kin
• 16/02/03
  • Re: [Sphenix-magnet-l] sPHENIX Magnet meeting on Feb. 3 at 1:30 pm in the 902 conference room, Makdisi, Yousef I
  • [Sphenix-magnet-l] Brief Summary of sPHENIX Magnet Biweekly meeting (Feb. 3, 2016), Kin Yip
  • [Sphenix-magnet-l] Wuzheng's newest force calculation for the High-Field-Test configuration (in 24 coils), Kin Yip
• 16/02/04
  • [Sphenix-magnet-l] Work permit in 912 ... pressure test/leak checking ... Temperature measurements TT01/TT02/TT03, Kin Yip
• 16/02/08
  • [Sphenix-magnet-l] status ... (pressure test/leak check) ... PLC sent too much current and burnt the positioner, Yip, Kin
• 16/02/09
  • [Sphenix-magnet-l] some certification/tests for the Al stabilizer, Kin Yip
  • [Sphenix-magnet-l] sPHENIX Magnet meeting on Feb. 10 at 1:30 pm in the 902 conference room, Yip, Kin
• 16/02/10
  • [Sphenix-magnet-l] Strain gauge measurements in BaBar (in our BaBar server), Kin Yip
  • [Sphenix-magnet-l] Brief Summary of sPHENIX Magnet Biweekly meeting (Feb. 10, 2016), Kin Yip
  • [Sphenix-magnet-l] not just strain gauge ... but also linear pot., Kin Yip
  • Re: [Sphenix-magnet-l] Some extracted Tie Rod Details from the documents, Yip, Kin
• 16/02/11
  • [Sphenix-magnet-l] pressure test/leak check done ... please sign off the checkoff list ... hypot/impulse test tomorrow, Kin Yip
  • [Sphenix-magnet-l] finished ASSRC checkoff list and the LESHC check list, Kin Yip
• 16/02/12
  • [Sphenix-magnet-l] Axial Tie Rod Information, Mills, James A
  • Re: [Sphenix-magnet-l] Axial Tie Rod Information, Kin Yip
  • Re: [Sphenix-magnet-l] Axial Tie Rod Information, Mills, James A
  • [Sphenix-magnet-l] marching towards the Cool-down, Kin Yip
  • Re: [Sphenix-magnet-l] finished ASSRC checkoff list and the LESHC check list, Kin Yip
  • [Sphenix-magnet-l] pre-test inspection completed ... DAQ/Quench protection running overnight, Yip, Kin
• 16/02/16
  • [Sphenix-magnet-l] still struggling with the PLC problem ... need Brian (OC) to fix, Yip, Kin
  • Re: [Sphenix-magnet-l] still struggling with the PLC problem ... need Brian (OC) to fix, Than, Yatming (Roberto)
  • [Sphenix-magnet-l] wiring problem ??, Kin Yip
• 16/02/17
  • Re: [Sphenix-magnet-l] sPHENIX, Kin Yip
• 16/02/18
  • Re: [Sphenix-magnet-l] sPhenix controls, Kin Yip
• 16/02/19
  • Re: [Sphenix-magnet-l] Remotely access ERL/sPhenix Cryo screens (this email contains pictures...view it in a client that supports html), Yip, Kin

Archive powered by MHonArc 2.6.24.