Skip to Content.
Sympa Menu

sphenix-magnet-l - [Sphenix-magnet-l] "T" at the end of connector at the bottom of the new junction box (doghouse)

sphenix-magnet-l AT lists.bnl.gov

Subject: sPHENIX discussion of the superconducting solenoid

List archive

Chronological Thread  
  • From: Kin Yip <kinyip AT bnl.gov>
  • To: "sphenix-magnet-l AT lists.bnl.gov" <sphenix-magnet-l AT lists.bnl.gov>
  • Subject: [Sphenix-magnet-l] "T" at the end of connector at the bottom of the new junction box (doghouse)
  • Date: Tue, 10 Jan 2017 14:45:16 -0500

Hi,

From the email below and phone calls, I understand that Paul Kovach and Sonny (whom I asked to help last week) have worked together and
they've made the following purchase request.    Hopefully, cheap enough for Ed  ;-)

Kin


-------- Forwarded Message -------- Subject: RE: Can you please put a "T" at the end of connector at the bottom of the new junction box (doghouse) ? Date: Tue, 10 Jan 2017 14:35:22 -0500 From: Kovach, Paul E <kovach AT bnl.gov> To: Yip, Kin <kinyip AT bnl.gov>

The tee is $96 and the 3 seals are $10.50 each.

 

From: Kin Yip [mailto:kinyip AT bnl.gov]
Sent: Tuesday, January 10, 2017 2:12 PM
To: Kovach, Paul E
Subject: Re: Can you please put a "T" at the end of connector at the bottom of the new junction box (doghouse) ?

 

Hi,

How much is the requisition for this T and seals ??

Kin

On 01/10/2017 01:36 PM, Kovach, Paul E wrote:

The req for the tee and required seals has been submitted.

 

Paul

 

From: Yip, Kin
Sent: Wednesday, January 04, 2017 3:17 PM
To: Ceruti, Raymond B; Kovach, Paul E
Cc: Dimaiuta, Sebastian A; sphenix-magnet-l AT lists.bnl.gov
Subject: Can you please put a "T" at the end of connector at the bottom of the new junction box (doghouse) ?

 

Hi Ray and Paul,

 

I mentioned this to Paul a while ago though I thought we could do this in later years … but in today’s meeting, Don Lynch and others

“demanded” this “T” again at the end of the connector at the bottom of the new junction box (doghouse).   They pointed out that we should do it

now (in the installation before the High-Field Test).  Because if we don’t do it now, we may have to break cables or soldering (etc.) if

we want a “T” later.

 

I attach a couple pictures (originally from Paul Kovach I believe) to help you understand what I understand.  People raised question

when they didn’t see the “T” in the picture.

 

So, could you guys please put a “T” at the end of the connector (even though we only use one end of the “T” in this High-Field test) ? 

 

Kin

 



  • [Sphenix-magnet-l] "T" at the end of connector at the bottom of the new junction box (doghouse), Kin Yip, 01/10/2017

Archive powered by MHonArc 2.6.24.

Top of Page