sPHENIX discussion of the superconducting solenoid

["Yip, Kin" <kinyip AT bnl.gov>]

Hi,

I've learnt that  they (riggers, techs ...) had to build the platform, cut open the wall (by the staircase), ship the dump resistor/power supply up there and put back
the wall again.  In fact, it's not obvious that the wall has been cut and put back (though I was not looking for any sign).

Kin

On 09/27/2018 05:15 PM, EdwardOBrien wrote:

    Hi Kin,
     OK. Now there is no doubt where those components are located.
    This is a good starting point for the work we have to do
    to prepare for the SC-magnet in the 1008 complex. 

    Ed

On 9/27/2018 3:01 PM, Yip, Kin wrote:

Hi Paul, Ed, ... Pablo,

In the L2 manager meeting, somebody were not convinced that the power supply and dump resistor have been moved to 1008B.

So, I just came to 1008B(after some verbal instructions from Paul Giannotti) and with some trials and errors --- I did walk to and over the grassland after I couldn't find anything on the 1008B floor --- I found the staircase on the right hand side of the building and opened the door to find the power supply and dump resistor on the highbay platform, picture attached.

Kin

_______________________________________________
sPHENIX-magnet-l mailing list
sPHENIX-magnet-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/sphenix-magnet-l