sPHENIX discussion of the superconducting solenoid

["Yip, Kin" <kinyip AT bnl.gov>]

Hi,

 

Thanks for Paul’s confirmation.    So, Chris, can you please change the no. to 8” ?

 

Kin

 

From: Kovach, Paul E <kovach AT bnl.gov>
Sent: Monday, June 15, 2020 3:00 PM
To: Yip, Kin <kinyip AT bnl.gov>; Pontieri, Chris <cpontieri AT bnl.gov>; Hock, Jonathan <jhock AT bnl.gov>
Cc: Vasquez, Joel <jvasquez AT bnl.gov>
Subject: RE: Interface Sign off for End Cap PRR

 

The extension pipe is 8.00 od.

 

From: Yip, Kin <kinyip AT bnl.gov>
Sent: Monday, June 15, 2020 7:07 AM
To: Pontieri, Chris <cpontieri AT bnl.gov>; Hock, Jonathan <jhock AT bnl.gov>
Cc: Vasquez, Joel <jvasquez AT bnl.gov>; Kovach, Paul E <kovach AT bnl.gov>
Subject: RE: Interface Sign off for End Cap PRR

 

Hi,

 

Paul hasn't replied to me yet.

 

One thought : His magnet model was older than the drawings that were made to actually make the extension by the shop.  I tend to think the latter (8") is more realistic ...

 

I hope Paul can tell us soon.😮

 

Kin

 

 

 

-------- Original message --------

From: "Pontieri, Chris" <cpontieri AT bnl.gov>

Date: 6/15/20 06:53 (GMT-05:00)

To: "Yip, Kin" <kinyip AT bnl.gov>, "Hock, Jonathan" <jhock AT bnl.gov>

Cc: "Vasquez, Joel" <jvasquez AT bnl.gov>

Subject: RE: Interface Sign off for End Cap PRR

 

Kin

Have you and Paul discussed the diameter of the valve extension yet?

 

From: Yip, Kin <kinyip AT bnl.gov>
Sent: Friday, June 12, 2020 2:31 PM
To: Hock, Jonathan <jhock AT bnl.gov>; Pontieri, Chris <cpontieri AT bnl.gov>
Cc: Vasquez, Joel <jvasquez AT bnl.gov>
Subject: RE: Interface Sign off for End Cap PRR

 

Hi,

 

I’ll try to contact Paul --- he hasn’t replied to me.

 

Kin

 

From: Hock, Jonathan <jhock AT bnl.gov>
Sent: Friday, June 12, 2020 1:41 PM
To: Yip, Kin <kinyip AT bnl.gov>; Pontieri, Chris <cpontieri AT bnl.gov>
Cc: Vasquez, Joel <jvasquez AT bnl.gov>
Subject: RE: Interface Sign off for End Cap PRR

 

Kin,

 

The 8.63” is based on the step file of the magnet we got from Paul Kovach years ago. This is the same model we used for the high field test. You should verify this dimension from Paul.

 

From: sPHENIX-magnet-l <sphenix-magnet-l-bounces AT lists.bnl.gov> On Behalf Of Yip, Kin
Sent: Friday, June 12, 2020 1:16 PM
To: Pontieri, Chris <cpontieri AT bnl.gov>
Cc: Vasquez, Joel <jvasquez AT bnl.gov>
Subject: Re: [Sphenix-magnet-l] Interface Sign off for End Cap PRR

 

Hello Chris,

 

I’ve checked the dimensions of 12” and 6.5” with my sources.

 

But you state that the diameter of  Valvebox Extension is 8.63” which makes me very curious.

 

From Paul Kovach’s drawings (according to which the Central shop made), I’ve found two drawings attached:

https://brookhavenlab.sharepoint.com/:u:/s/sPHENIXMagnet/External/EVxzUcHiXflLhuMzDBh1u-UBZVyUAg3XHHzNpBr8r6H8Wg?e=zSRqDQ

 

It’s 8” (46010011.pdf) and even in the flange adapter drawing, it’s 8.46” (46010214.pdf).   Where/how have you got this 8.63” ???

You measured it ???

 

Kin

 

From: Pontieri, Chris <cpontieri AT bnl.gov>
Sent: Friday, June 12, 2020 12:08 PM
To: Feder, Russell <rfeder AT bnl.gov>; Yip, Kin <kinyip AT bnl.gov>; Vasquez, Joel <jvasquez AT bnl.gov>; Pontieri, Chris <cpontieri AT bnl.gov>
Cc: Mills, James A <mills AT bnl.gov>; Hock, Jonathan <jhock AT bnl.gov>
Subject: Interface Sign off for End Cap PRR

 

Hi All

In preparing for the PRR for the End Caps the group came across an interface that we felt we needed to define and place into the Interface Control Document SP.SE.ICD.015 MAG/INF.  This email is intended to make you aware of such interfaces as well as get your sign off that you are aware of the interface and that we have made the proper provisions to accommodate that interface.

 

Description of interface: (See attached ppt slide)

The interface is between the End Caps and the Beam Pipe on the North and South end, as well as, the Valve box extension on the South End.  Attached is a ppt slide that shows the dimensions of the openings in the End Cap, and the dimensions of the objects coming through those openings.  The engineering/design team for the End Caps is confident they have allowed enough clearance for these interfaces. 

 

The following is the list of people required to sign off:

 

PLEASE “REPLY ALL” WITH AN “APPROVED”

If you have any questions/comments please feel free to email the group.

 

 

Christopher Pontieri

Brookhaven National Laboratory

Physics-Bldg 510

20 Pennsylvania St.

P.O. Box 5000

Upton, NY 11973

Tele (631)-344-5038

cpontieri AT bnl.gov