sPHENIX discussion of the superconducting solenoid

["Yip, Kin" <kinyip AT bnl.gov>]

Hi,

 

I took a picture this afternoon (Tuesday, Oct. 20, 2020) of the Helium spool #4 sticking out of the West Wall in 1008:

 

https://brookhavenlab.sharepoint.com/:i:/s/sPHENIXMagnet/External/EXmA6KQZD1BLje9DFbq6tmcBiKdMrA1dWfruZD6fg5W7ow?e=efORxh

 

Kin

 

From: Yip, Kin
Sent: Monday, October 19, 2020 2:02 PM
To: sphenix-magnet-l AT lists.bnl.gov
Subject: spools up to 4 installed

 

Hi,

 

From my communication below with Paul Orfin, it seems that the Helium system spools 1..4 have been installed from the 1008B through the west wall penetration of 1008 (IR).

 

I heard from Jim Mills that the west wall cryo deck is being constructed by the vendor and some other components by BNL … The cryo deck may be available next week and

we can install spool #5 then.

 

Kin

 

From: Orfin, Paul <porfin AT bnl.gov>
Sent: Monday, October 19, 2020 1:09 PM
To: Yip, Kin <kinyip AT bnl.gov>
Subject: RE: LN2 ? ... cryo deck (spool 5).

 

Yes, it is supported from the outside shielding block and external metal supports.  It hangs out of the west wall penetration.

 

Thank you,

Paul Orfin
Cryogenic Systems, Collider-Accelerator Department
Brookhaven National Laboratory
Telephone: (631) 344-2899

 

From: Yip, Kin <kinyip AT bnl.gov>
Sent: Monday, October 19, 2020 1:07 PM
To: Orfin, Paul <porfin AT bnl.gov>
Subject: RE: LN2 ? ... cryo deck (spool 5).

 

Hi,

 

Just a question out of my ignorance:

 

So, #4 is already installed even without the cryo deck ???

 

Kin

 

From: Orfin, Paul <porfin AT bnl.gov>
Sent: Monday, October 19, 2020 1:06 PM
To: Yip, Kin <kinyip AT bnl.gov>
Subject: RE: LN2 ? ... cryo deck (spool 5).

 

4 is welded to #3 already.  #4 has caps on the end so we can do a pressure test on the first 4 lines till the cryo deck is installed.  This way we can keep working. 

 

Thank you,

Paul Orfin
Cryogenic Systems, Collider-Accelerator Department
Brookhaven National Laboratory
Telephone: (631) 344-2899

 

From: Yip, Kin <kinyip AT bnl.gov>
Sent: Monday, October 19, 2020 9:54 AM
To: Orfin, Paul <porfin AT bnl.gov>
Subject: RE: LN2 ? ... cryo deck (spool 5).

 

Hi,

 

Thanks.  We probably randomly mention #5 …  I’m wondering whether you’ll do spool #4 first (as it’s partly in and partly out of the 1008 building) …

 

Kin

 

From: Orfin, Paul <porfin AT bnl.gov>
Sent: Monday, October 19, 2020 9:44 AM
To: Yip, Kin <kinyip AT bnl.gov>
Subject: RE: LN2 ? ... cryo deck (spool 5).

 

I am waiting to hear from procurement on the LN2.  I sent questions to her last week.

 

We will be ready to get spool #5 once the platform is installed and approved for usage.  We are working on getting all the other lines going in the meantime.

 

Thank you,

Paul Orfin
Cryogenic Systems, Collider-Accelerator Department
Brookhaven National Laboratory
Telephone: (631) 344-2899

 

From: Yip, Kin <kinyip AT bnl.gov>
Sent: Monday, October 19, 2020 9:33 AM
To: Orfin, Paul <porfin AT bnl.gov>
Subject: LN2 ? ... cryo deck (spool 5).

 

Hi,

 

Have you decided whether the LN2 project bidder is acceptable or not ??

 

This morning, Jim Mills is saying (in our Division meeting) that the cryo deck is being constructed and may be done next week and we should start thinking about installing the spool #5 (?).

 

Kin