sPHENIX discussion of the superconducting solenoid

["Yip, Kin" <kinyip AT bnl.gov>]

Hi Carl,

 

This is the crash button in the Control Room for the magnet (in addition to one on the platform and another on the floor of the 1008 IR).

 

In addition to Joel’s pictures, I took a picture of the Rack 5 (“PCR 5” in the picture “Rack 5 in Control Room.jpg”) that Joel told me that our crash button should be.

For the other end, I took a picture of the panel “Panel in 1008B (first floor).jpg”  (which is closed ---I needed to use a screw driver to open it) on 1008B first floor.  

It’s almost directly below your Quench Detector Rack in the mezzanine. 

 

Carl (and I) are purchasing the buttons.

 

Kin

_____________________________________________
From: Vasquez, Joel <jvasquez AT bnl.gov>
Sent: Thursday, January 20, 2022 2:03 PM
To: Yip, Kin <kinyip AT bnl.gov>
Cc: Paul Giannotti <gpaulman56 AT gmail.com>; Haggerty, John <haggerty AT bnl.gov>
Subject: RE: one existing connection between 1008B and sPHENIX Control Room

 

 

Hi Kin,

 

We have a multiconductor (37C – 18AWG). We verified the run from control room to 1008B for you.

Does one pair of wires work for you?

 

                                                                                                                                                                                                                                         

 

_____________________________________________
From: Yip, Kin <kinyip AT bnl.gov>
Sent: Wednesday, January 19, 2022 2:20 PM
To: Vasquez, Joel <jvasquez AT bnl.gov>; Haggerty, John <haggerty AT bnl.gov>
Cc: Paul Giannotti <gpaulman56 AT gmail.com>
Subject: one existing connection between 1008B and sPHENIX Control Room

 

 

Hi Joel,

 

I just chatted with John again and John said that you may be able to answer this question/help.   You remember that we need a crash button in the sPHENIX

Control Room for the sPHENIX Magnet (in addition to one on the platform and another on the floor in 1008 IR).

 

Do you already have an existing connection (just one and only one) between 1008B and Control Room that we may just use ?   Otherwise, it’s difficult to pull a cable from the Control Room to 1008B ourselves.

 

Kin

Attachment: image001.emz
Description: image001.emz

Attachment: image010.emz
Description: image010.emz

Attachment: 1050509-194-5-1.pdf
Description: 1050509-194-5-1.pdf

Attachment: Rack 5 in Control Room.jpg
Description: Rack 5 in Control Room.jpg

Attachment: Panel in 1008B (first floor).jpg
Description: Panel in 1008B (first floor).jpg