sPHENIX discussion of the superconducting solenoid

[Kin Yip <kinyip AT bnl.gov>]

Hello,

The following is about the cable pulling for the voltage-tap cables and two of the crash button cables.  ( The last crash-button from

sPHENIX-Control-Room to 1008B is already established --- an old connection that J. Vasquez gave us. )

Kin

-------- Forwarded Message --------

Subject:	RE: 1008 cables
Date:	Tue, 31 May 2022 08:42:50 -0400
From:	Benante, John T <benante AT bnl.gov>
To:	Yip, Kin <kinyip AT bnl.gov>

I have it coiled up on the west wall waiting for the rest of the cable tray to be installed on the floor

 

From: Yip, Kin
Sent: Tuesday, May 31, 2022 8:39 AM
To: Benante, John T <benante AT bnl.gov>; Schultheiss, Carl <carls AT bnl.gov>
Cc: Sampson, Paul <sampson AT bnl.gov>
Subject: RE: 1008 cables

 

Hi John,

 

Thanks a lot.

 

I hope you’ve used my 470 ft 280 ft division (to cut) for the crash button cable ?

One crash button cable and the Carl’s voltage tap cables can only hang on the west deck as there is no platform.

 

Does that one crash button cable go all the way to the shielding block (north-east of the IR) or it’s still hanging on the west deck in the 1008-IR ?

 

Kin

 

From: Benante, John T <benante AT bnl.gov>
Sent: Tuesday, May 31, 2022 8:27 AM
To: Yip, Kin <kinyip AT bnl.gov>; Schultheiss, Carl <carls AT bnl.gov>
Cc: Sampson, Paul <sampson AT bnl.gov>
Subject: 1008 cables

 

Kin

The crash buttons and Carl’s cable were pulled into the 1008 IR on Friday.

John Benante