sphenix-magnet-l AT lists.bnl.gov

Subject: sPHENIX discussion of the superconducting solenoid

List archive

Re: [Sphenix-magnet-l] No leak for the pressure test => please proceed

From: "Sullivan, Daniel" <dans AT bnl.gov>
To: "Yip, Kin" <kinyip AT bnl.gov>, "sphenix-magnet-l AT lists.bnl.gov" <sphenix-magnet-l AT lists.bnl.gov>
Subject: Re: [Sphenix-magnet-l] No leak for the pressure test => please proceed
Date: Wed, 20 Jul 2022 14:14:41 +0000

Will do, thanks!

From: Yip, Kin <kinyip AT bnl.gov>
Sent: Wednesday, July 20, 2022 9:15 AM
To: sphenix-magnet-l AT lists.bnl.gov; Sullivan, Daniel <dans AT bnl.gov>
Subject: No leak for the pressure test => please proceed

Hello Ray, Dan and all,

I am at 1008 and Ken Ruler and his Cryo colleagues have just finished the leak check for the pressure test (80 psi) successfully (in the Doghouse). No leak ! ( It seems that they went to 87 psi for 10 minutes and went down to 80 psi for leak check. )

Can you please proceed to change the connectors , install the cold-bar (?) ??

Kin

[Sphenix-magnet-l] No leak for the pressure test => please proceed, Yip, Kin, 07/20/2022
- Re: [Sphenix-magnet-l] No leak for the pressure test => please proceed, Sullivan, Daniel, 07/20/2022
  - Message not available
    - Message not available
      - Message not available
        
        Message not available
        
        Message not available
        
        [Sphenix-magnet-l] connector work not yet done ..., Yip, Kin, 07/20/2022
- Re: [Sphenix-magnet-l] No leak for the pressure test => please proceed, Yip, Kin, 07/20/2022