sphenix-magnet-l AT lists.bnl.gov

Subject: sPHENIX discussion of the superconducting solenoid

List archive

Re: [Sphenix-magnet-l] No leak for the pressure test => please proceed

From: "Yip, Kin" <kinyip AT bnl.gov>
To: "sphenix-magnet-l AT lists.bnl.gov" <sphenix-magnet-l AT lists.bnl.gov>
Subject: Re: [Sphenix-magnet-l] No leak for the pressure test => please proceed
Date: Wed, 20 Jul 2022 17:34:03 +0000

By the way, it’s Ken Riker, not Ken Ruler. I thought I typed “Riker” but the auto-correcting thing screwed up.

And it’s not just Ken, but many other Cryo group members that I don’t know their names 😊 Thanks to all of them !!!

Kin

From: sPHENIX-magnet-l <sphenix-magnet-l-bounces AT lists.bnl.gov> On Behalf Of Yip, Kin
Sent: Wednesday, July 20, 2022 9:15 AM
To: sphenix-magnet-l AT lists.bnl.gov; Sullivan, Daniel <dans AT bnl.gov>
Subject: [Sphenix-magnet-l] No leak for the pressure test => please proceed

Hello Ray, Dan and all,

I am at 1008 and Ken Ruler and his Cryo colleagues have just finished the leak check for the pressure test (80 psi) successfully (in the Doghouse). No leak ! ( It seems that they went to 87 psi for 10 minutes and went down to 80 psi for leak check. )

Can you please proceed to change the connectors , install the cold-bar (?) ??

Kin

[Sphenix-magnet-l] No leak for the pressure test => please proceed, Yip, Kin, 07/20/2022
- Re: [Sphenix-magnet-l] No leak for the pressure test => please proceed, Sullivan, Daniel, 07/20/2022
  - Message not available
    - Message not available
      - Message not available
        
        Message not available
        
        Message not available
        
        [Sphenix-magnet-l] connector work not yet done ..., Yip, Kin, 07/20/2022
- Re: [Sphenix-magnet-l] No leak for the pressure test => please proceed, Yip, Kin, 07/20/2022