sphenix-magnet-l AT lists.bnl.gov
Subject: sPHENIX discussion of the superconducting solenoid
List archive
[Sphenix-magnet-l] Switching the phase this afternoon for 1008C (report) .... possible reversal problem for the Magnet Power Supply
- From: "Yip, Kin" <kinyip AT bnl.gov>
- To: "sphenix-magnet-l AT lists.bnl.gov" <sphenix-magnet-l AT lists.bnl.gov>
- Subject: [Sphenix-magnet-l] Switching the phase this afternoon for 1008C (report) .... possible reversal problem for the Magnet Power Supply
- Date: Thu, 6 Oct 2022 15:50:09 +0000
Hi Pablo,
I was just sitting together with PK Feng, Dennis Donaldson and Robert Hoogsteden discussing this matter of reversing phases for 1008C. The conclusion is to do what Dennis had earlier told the line crew to do for 1008C.
on ☹ 😊 Our Magnet Power Supply is subject to polarities.
Interestingly, the computers and racks in 1008B mezzanine are using the power from the 1008A substation (in the 1008 parking lot); whereas the Magnet Power Supply in 1008B mezzanine (just next to the computer) and pump room in 1008C are using the power from the substation 1008B. So, even when they’re shutting down and reversing stuff for 1008B, I don’t need to worry about the power for the computers (which are running !) in the 1008B mezzanine 😊 as they used power from a different substation (1008A). Quite confusing …
But an hour ago, when I first told PK what the plan was --- somehow I talked to PK more than anybody else in BNL, PK was “yelling” (OK, I exaggerated !) that it’s “impossible” as he remembered nothing was done since 2016 (when PHENIX was shut down) to reverse the phases. They (PK/Dennis/Bob) temporarily halted the plan for the reversal. PK was talking with Marty (line crew ?) … After nearly a long and very civilized discussion, they finally found a cause for a plausible upstream change that might have affected 1008C (and possibly the power for the Power Supply). Nobody had noticed anything because we had not used 1008C and the Magnet Power Supply. They’ll check on that upstream change (in near future) but since we want chilling water etc. now, they decided that it’s easier to reverse phase for 1008C as they originally planned (by Dennis). Marty got the message … ( My role there, in addition to curiosity, was partially to prevent a long academic study … but to have power for the customer --- 1008C pump room. )
Just a “journalist” reporting …
Kin
From:
Edward O'Brien <eobrien AT bnl.gov>
Hi Kin, On 10/6/22 11:01 AM, Yip, Kin wrote:
|
-
[Sphenix-magnet-l] Switching the phase this afternoon for 1008C,
Yip, Kin, 10/06/2022
-
Re: [Sphenix-magnet-l] Switching the phase this afternoon for 1008C,
Edward O'Brien, 10/06/2022
-
Re: [Sphenix-magnet-l] Switching the phase this afternoon for 1008C,
Yip, Kin, 10/06/2022
-
Re: [Sphenix-magnet-l] Switching the phase this afternoon for 1008C,
Edward O'Brien, 10/06/2022
- [Sphenix-magnet-l] Switching the phase this afternoon for 1008C (report) .... possible reversal problem for the Magnet Power Supply, Yip, Kin, 10/06/2022
-
Re: [Sphenix-magnet-l] Switching the phase this afternoon for 1008C,
Edward O'Brien, 10/06/2022
-
Re: [Sphenix-magnet-l] Switching the phase this afternoon for 1008C,
Yip, Kin, 10/06/2022
-
Re: [Sphenix-magnet-l] Switching the phase this afternoon for 1008C,
Edward O'Brien, 10/06/2022
Archive powered by MHonArc 2.6.24.