Skip to Content.
Sympa Menu

sphenix-magnet-l - Re: [Sphenix-magnet-l] Testing the power supply ... Light was ON

sphenix-magnet-l AT lists.bnl.gov

Subject: sPHENIX discussion of the superconducting solenoid

List archive

Chronological Thread  
  • From: "Feder, Russell" <rfeder AT bnl.gov>
  • To: "Yip, Kin" <kinyip AT bnl.gov>, "sphenix-magnet-l AT lists.bnl.gov" <sphenix-magnet-l AT lists.bnl.gov>
  • Cc: "Michnoff, Robert J" <michnoff AT bnl.gov>
  • Subject: Re: [Sphenix-magnet-l] Testing the power supply ... Light was ON
  • Date: Fri, 14 Oct 2022 19:15:51 +0000

Kin
This is good news. Thank you

Russell Feder
Brookhaven National Lab
sPHENIX Chief Mechanical Engineer
631-655-2491



From: sPHENIX-magnet-l <sphenix-magnet-l-bounces AT lists.bnl.gov> on behalf of Yip, Kin <kinyip AT bnl.gov>
Sent: Friday, October 14, 2022 2:56 PM
To: sphenix-magnet-l AT lists.bnl.gov <sphenix-magnet-l AT lists.bnl.gov>
Cc: Michnoff, Robert J <michnoff AT bnl.gov>
Subject: [Sphenix-magnet-l] Testing the power supply ... Light was ON
 
Hi,

There was a delay due to a couple old locks that keys were not available.  After this problem was resolved, they apparently were able to turn on the power supply, thus confirming that the power panel polarity was right (and we don't need electricians to do anything).

In 1008, I saw the Magnet-ON light was ON (flashing) and turned off when Ron Walker pressed one of the crash buttons.

Next, Ron told me that they are going to do the 2-ohm test ....

Kin




Archive powered by MHonArc 2.6.24.

Top of Page