sPHENIX MAPS tracker discussion

["Ming Liu (ming AT bnl.gov)" <ming AT bnl.gov>]

Hi John, 

Sounds very interesting seminar for us.  Is it possible to have BlueJeans
connections? Or at least, get the slides later?

Cheers,
Ming 

-- 
Ming Xiong Liu
P-25, MS H846                   TEL:            505-667-7125
Physics Division                                        631-344-7821(BNL)
LANL                                                    630-840-5708(FNAL)
Los Alamos, NM 87545    FAX:    505-665-7020






On 9/14/17, 9:04 AM, "sPHENIX-MAPS-l on behalf of John Haggerty"
<sphenix-maps-l-bounces AT lists.bnl.gov on behalf of haggerty AT bnl.gov> wrote:

>*Instrumentation Division Seminar*
>
>*Wednesday, September 20, 2017*
>
>*Title:*             Common Readout Card (CRU) for the ALICE Run3 Upgrade
>
>*Speaker:*       Jozsef Imrek, CERN
>
>*Time:*2:30 p.m.
>
>*Place:*          Large Conference Room, BLDG 535B (Instrumentation
>Division)
>
>*Abstract:*****
>
>**
>
>******
>
>ALICE is preparing a major upgrade for 2021.
>
>All subdetectors upgrading their counting room DAQ electronics will use
>a common hardware to receive physics data: the Common Readout Unit
>(CRU). The CRU is a PC based readout card featuring an Intel Arria 10
>FPGA, up to 48 full duplex optical links with a maximum line rate of 10
>Gbit/s, and a Gen3 x16 PCIe interface for host connectivity.
>
>The same CRU will also distribute the LHC clock and trigger
>synchronously to most of the upgrading subdetectors (to ~7800 front end
>cards).
>
>Details of the CRU readout card, its usage in ALICE, and the current
>status and future plans for hardware production, FPGA firmware, and
>readout software will be presented.
>
>
>-- 
>John Haggerty
>email: haggerty AT bnl.gov
>cell: 631 741 3358