sPHENIX MAPS tracker discussion

["Schmier, Austin" <aschmier AT vols.utk.edu>]

Yasser - In the "Check and Fuse GBTx0" title, it is in fact programmed as a "0", not an "o". I'm not sure why latex is interpreting it this way. I have fixed figure 9, though.

Jo - My apologies. I misunderstood what you meant. I believe I have fixed the arrow in this new version (attached). If not, please let me know. Your other two bullet points have been tended to.

Best,

Austin

On Tue, Jun 8, 2021 at 12:12 PM Schambach, Jo <schambachjj AT ornl.gov> wrote:

I noticed that a couple of our suggestions weren’t making it into you latest version:

 

• The green arrow in Figure 3 for “control” should be bi-directional
• Under “Check and Fuse…” GBTx1 and GBTx2 are not fused, but are programmed by the main FPGA during boot”
• “select-map” -> “SelectMap”

 

From: sPHENIX-MAPS-l <sphenix-maps-l-bounces AT lists.bnl.gov> On Behalf Of Schmier, Austin via sPHENIX-MAPS-l
Sent: Tuesday, June 8, 2021 11:46 AM
To: Liu, Ming Xiong <mliu AT lanl.gov>
Cc: sphenix-maps-l AT lists.bnl.gov
Subject: Re: [Sphenix-maps-l] [EXTERNAL] Re: RHIC/AGS Meeting MVTX Poster

 

Nice catch. Thanks, everyone. Here is the final version. Let me know if you think of anything else before Thursday!

 

Best regards,

Austin

 

On Mon, Jun 7, 2021 at 5:10 PM Liu, Ming Xiong <mliu AT lanl.gov> wrote:

Hi Austin,

 

Nice, just one minor comment:

1. Fig. 1 , typo  “IINT” à “INTT”

 

Cheers,

Ming

 

 

-----

Dr. Ming Xiong Liu P-3, MS H846 Physics Division   Office: 505.667.7125 Mobile: 505.412.7396 Los Alamos National Laboratory lanl.gov

-- 

 

 

From: sPHENIX-MAPS-l <sphenix-maps-l-bounces AT lists.bnl.gov> on behalf of SPHENIX MVTX <sphenix-maps-l AT lists.bnl.gov>
Reply-To: "Schmier, Austin" <aschmier AT vols.utk.edu>
Date: Monday, June 7, 2021 at 2:27 PM
To: "Ming Liu (BNL)" <ming AT bnl.gov>
Cc: SPHENIX MVTX <sphenix-maps-l AT lists.bnl.gov>
Subject: [EXTERNAL] Re: [Sphenix-maps-l] RHIC/AGS Meeting MVTX Poster

 

Hi all,

 

Thanks for the comments. I have fixed the majority of them and attached the pdf to this email. The two that I haven't fixed are below...

 

Yasser - "During short loopback test do we check the orange fiber path in Fig 7?"

I have emailed Jo to verify whether we do or not.

 

Ming - "you may want to increase the text font size, well that also means you may need to reduce the text .. "

I'd be happy to reduce the text, but everything I have included seems relevant to me. If you (or anyone else) has suggestions for what I could cut out, please let me know.

 

Best regards,

Austin

 

On Fri, Jun 4, 2021 at 5:47 PM Ming Liu via sPHENIX-MAPS-l <sphenix-maps-l AT lists.bnl.gov> wrote:

Hi Austin,

A nice poster! Two additional suggestions to consider:

1. Figure 1, the mechanical sideview is from very old design, you can get the final design from here, pages 8, 9, 10

https://www.phenix.bnl.gov/WWW/publish/mxliu/sPHENIX/GenMeetings/2019/MVTX-Overview-Collaboration-Mtg-11012019-v2.pptx  

 

2. Your presentaiton will be online, right? To show them clearly on the computer screen, you may want to increase the text font size, well that also means you may need to reduce the text ..

 

Cheers,

Ming

 

 

-----

Dr. Ming Xiong Liu P-3, MS H846 Physics Division   Office: 505.667.7125 Mobile: 505.412.7396 Los Alamos National Laboratory lanl.gov

-- 

 

 

From: sPHENIX-MAPS-l <sphenix-maps-l-bounces AT lists.bnl.gov> on behalf of SPHENIX MVTX <sphenix-maps-l AT lists.bnl.gov>
Reply-To: Yasser Corrales Morales <ycorrale AT cern.ch>
Date: Friday, June 4, 2021 at 3:17 PM
To: SPHENIX MVTX <sphenix-maps-l AT lists.bnl.gov>
Subject: Re: [Sphenix-maps-l] RHIC/AGS Meeting MVTX Poster

 

Hi Austin,

The poster looks very nice. Please find below some suggestion:

General comments:

 - Add a space between colon (:) and caption in the Figures. e. g., Figure 1:Cutaway view ... -> Figure 1: Cutaway view ...

- I would add Figure or Fig. when referring a figure instead just the number,  [4] -> [Fig. 4]

Fig. 3:

 the point end of internal RU (black) arrows in the VTRx are opposite to the signal highlighted out the dash line box. The bottom arrow is input and top is output.

the control signal is bidirectional, but it  uses both VTRx  fibers.

 

Fig. 6 and 7:

- use same color notation for arrows on both figures. During short loopback test do we check the orange fiber path in Fig 7?

Conclusion:

- last bullet point to a wrong figure....

Cheers,

Yasser.

 

 

 

On 6/4/21 13:31, Schmier, Austin via sPHENIX-MAPS-l wrote:

Hi all,

 

I am presenting this poster at the upcoming user meeting. Please let me know if you have any comments or corrections you would like me to make before the meeting.

 

Best regards,

Austin Schmier

 

_______________________________________________

sPHENIX-MAPS-l mailing list

sPHENIX-MAPS-l AT lists.bnl.gov

https://lists.bnl.gov/mailman/listinfo/sphenix-maps-l

-- 

Yasser Corrales Morales

Postdoctoral Research Associate

PO Box 1663

MS H846

LANL

Los Alamos, NM 87544

_______________________________________________ sPHENIX-MAPS-l mailing list sPHENIX-MAPS-l AT lists.bnl.gov https://lists.bnl.gov/mailman/listinfo/sphenix-maps-l

_______________________________________________
sPHENIX-MAPS-l mailing list
sPHENIX-MAPS-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/sphenix-maps-l

Attachment: TestingMVTXReadoutUnits_4.pdf
Description: Adobe PDF document