sPHENIX Event Plane Detector discussion

["Pontieri, Chris" <cpontieri AT bnl.gov>]

Rich

I know this was a checking print that was sent around, have you gotten any approvals?  I think the SEPD team will require this stand in order to start putting together the sector/strong backs.

 

Best Regards,

 

Christopher Pontieri
sPHENIX
Physics Department
Office: 631.344.5038
cpontieri AT bnl.gov

Twitter | Facebook | Instagram | LinkedIn

 

From: Ruggiero, Richard
Sent: Thursday, March 16, 2023 9:02 AM
To: Feder, Russell <rfeder AT bnl.gov>; Rosi Reed <rosijreed AT lehigh.edu>; sphenix-sepd-l AT lists.bnl.gov; Haggerty, John <haggerty AT bnl.gov>; Cacace, Daniel <dcacace AT bnl.gov>; Hamblen, Peter <phamblen AT bnl.gov>; Pontieri, Chris <cpontieri AT bnl.gov>
Subject: RE: sEPD Engineering Questions

 

Hello All,

Updated assembly drawing attached, and I send order lists for -0025 & -0030 to Frank and Chris.

 

Rich

From: Feder, Russell <rfeder AT bnl.gov>
Sent: Wednesday, March 15, 2023 6:33 PM
To: Ruggiero, Richard <ruggiero AT bnl.gov>; Rosi Reed <rosijreed AT lehigh.edu>; sphenix-sepd-l AT lists.bnl.gov; Haggerty, John <haggerty AT bnl.gov>; Cacace, Daniel <dcacace AT bnl.gov>; Hamblen, Peter <phamblen AT bnl.gov>; Pontieri, Chris <cpontieri AT bnl.gov>
Subject: Re: sEPD Engineering Questions

 

Rich

Great! Thank you. I can see you added the holes for handles in the strongback plates.

We have to order correct QTYs of 16, 17, 18 from -0025 and all of the 80-20 and hardware on -0030. 

Rich...can you put this full order together on McMaster and then send to Frank and Chris?

Russ

 

Russell Feder

Brookhaven National Lab

631-655-2491

---

From: Ruggiero, Richard <ruggiero AT bnl.gov>
Sent: Wednesday, March 15, 2023 3:20:55 PM
To: Feder, Russell <rfeder AT bnl.gov>; Rosi Reed <rosijreed AT lehigh.edu>; sphenix-sepd-l AT lists.bnl.gov <sphenix-sepd-l AT lists.bnl.gov>; Haggerty, John <haggerty AT bnl.gov>; Cacace, Daniel <dcacace AT bnl.gov>; Hamblen, Peter <phamblen AT bnl.gov>; Pontieri, Chris <cpontieri AT bnl.gov>
Subject: RE: sEPD Engineering Questions

 

Hello All,

                Attached is a completed assembly drawing of the 80/20 Petal Carrier, Sector Frame & Sector Frame assembly. Please look these over and let me know if you have any questions or comments.

 

Thanks,

Rich

 

From: Feder, Russell <rfeder AT bnl.gov>
Sent: Wednesday, March 15, 2023 1:58 PM
To: Rosi Reed <rosijreed AT lehigh.edu>; sphenix-sepd-l AT lists.bnl.gov; Haggerty, John <haggerty AT bnl.gov>; Cacace, Daniel <dcacace AT bnl.gov>; Hamblen, Peter <phamblen AT bnl.gov>; Ruggiero, Richard <ruggiero AT bnl.gov>; Pontieri, Chris <cpontieri AT bnl.gov>
Subject: Re: sEPD Engineering Questions

 

sEPD team

The attached PDF was everything in the last McMaster order that was all for sEPD.  I am %99 sure this was for the support structures (larger hardware) and the sectors (smaller hardware).

The box of all this was given to the Lehigh team a few weeks ago and you should have it all.

Let me know if

1. There is anything missing from McMaster order
2. Anything we just forgot to order that we need for the sectors.

Russ

 

Russell Feder

C-AD Cryo Group Leader

sPHENIX Chief Mechanical Engineer

https://www.linkedin.com/in/russell-feder-engineer-manager/

Cell: 631-655-2491

Office:631-344-2253

---

From: Feder, Russell <rfeder AT bnl.gov>
Sent: Wednesday, March 15, 2023 1:50 PM
To: Rosi Reed <rosijreed AT lehigh.edu>; sphenix-sepd-l AT lists.bnl.gov <sphenix-sepd-l AT lists.bnl.gov>; Haggerty, John <haggerty AT bnl.gov>; Cacace, Daniel <dcacace AT bnl.gov>; Hamblen, Peter <phamblen AT bnl.gov>; Ruggiero, Richard <ruggiero AT bnl.gov>; Pontieri, Chris <cpontieri AT bnl.gov>
Subject: Re: sEPD Engineering Questions

 

 

Hi Russ and everyone,

After yesterday's meeting and our meeting this morning, we have a few questions to set our schedule's:

 

Handles on the petals (I attach Rich's picture): We will need to modify the petals for this, is that something that will be done here?  What is the time scale.  We will assemble 1 of the strongbacks with sectors asap to ensure everything works, but would not want to do this with the other's prior to the modification.

--> Rich is working to get the drawing to us in the next day or two.  Then we can drill and tap the petals next week.  We need to order the handles and get them in because the screw that clamps the handles to the strongback are screwed in from the tile side.

 

sEPD "bike rack": Once we assemble the sectors into the petals, we will need to be able to put them some place.  It would be good to know the time scale for approval, order and arrival for this.

--> Rich is working on finalizing this.  I will ask him to send the preliminary BOM so we can order the 80-20 and other hardware.

 

SiPM Box installation: We probably should have a dedicated discussion on this, some additional hardware will be needed.  (For instance, the standoffs.)

--> I am trying to figure this out too.  Will try to have some answers by Friday

 

McMaster Orders: Micah, JaeBeom, Tristan are doing inventory - it would be good to have the list of McMaster parts already ordered to check off what we have.

--> OK, I will send you what I have

 

Rosi

 

--

Rosi Reed
RHIC/AGS UEC member
Associate Professor, Physics Department
Lehigh University
(610)758-3907
16 Memorial Drive East Office 406
Bethlehem, PA 18015
she/her/hers