sPHENIX Event Plane Detector discussion

[Tristan Protzman <tlp220 AT lehigh.edu>]

Hi All,

I've tested the 60 delivered preamps, and 45 passed without issues.  While I can investigate the remaining 15 (many are likely fine and it's an issue with the tester), when combined with the EMCal modules I tested a few weeks back we have the 48 boards we need.

A summary of the testing can be found here: https://wiki.sphenix.bnl.gov/index.php/SPHENIX_Event_Plane_Detector#Testing

Cheers,

Tristan 

On Jun 14, 2023, at 12:30 PM, Tristan Protzman <tlp220 AT lehigh.edu> wrote:

Hi Eric,

Great, I'll grab the preamp boards and start working through them. 

Cheers,

Tristan 

On Wed, Jun 14, 2023, 12:13 Eric Mannel <mannel AT bnl.gov> wrote:

This morning I received the delivery of the sEPD preamps and interface boards.  The SiPM boards were delivered last Thursday. All boards are now in the HCal lab in 510. 

I will work with Sal to get the Interface tester up and operational. Tristan, you can start testing preamps when you have time. I am not sure if there is a plan  to test the SiPM boards before installing them into the boxes. Jimmy has started to prepare for mounting preamps on cooling plates and Mike has fabricated cooling loops for the interface boards.

 

Have a good weekend...

Eric

-- 
Eric J. Mannel, Ph.D.
Research Engineer
Dept of Physics/PHENIX
Brookhaven National Laboratory
631/344-7626 (Office)
914/659-3235 (cell) 

_______________________________________________
sPHENIX-sEPD-l mailing list
sPHENIX-sEPD-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/sphenix-sepd-l

<IMG_4918.jpg><IMG_4904.jpg><IMG_4919.jpg><IMG_4919.jpg><IMG_4919.jpg><IMG_4919.jpg>