sphenix-tpc-l AT lists.bnl.gov

Subject: Sphenix-tpc-l mailing list

List archive

Re: [Sphenix-tpc-l] TPC Laser Calibration Meeting: Fri. August 28, 9am

From: Dan Cacace <dannycacace AT gmail.com>
To: Bob Azmoun <azmoun AT bnl.gov>
Cc: Bill Lenz <wlenz AT bnl.gov>, Connor <cmiraval AT bnl.gov>, Glenn Young <glennyoung82251 AT gmail.com>, "Cacace, Daniel" <dcacace AT bnl.gov>, sphenix_tpc_general AT skipper.physics.sunysb.edu, Salvatore Baldinucci <salvatore.baldinucci AT stonybrook.edu>
Subject: Re: [Sphenix-tpc-l] TPC Laser Calibration Meeting: Fri. August 28, 9am
Date: Fri, 28 Aug 2020 11:13:13 -0400

Hi Bob,

This is what I was thinking for the beam splitter (obviously not geometrically correct). One less splitter overall, only two types (33/67 custom? and 50/50 off the shelf), and it can easily work with 4 lasers instead of two by removing the first splitter. The catch is the coupling of the fibers won't be in a straight line without mirrors, but I think we can live with that.

-Dan

On Thu, Aug 27, 2020 at 8:35 PM Bob Azmoun <azmoun AT bnl.gov> wrote:

Dear All,

Though there's probably not much to report this week due to preparations for the laser system review, let's meet anyway to briefly discuss some of the important items that were brought up during the review.
.
A link to the Indico page is here: https://indico.bnl.gov/event/9284/
and the bluejeans link is here: https://bluejeans.com/881710315

Talk to you tomorrow!

Cheers,
Bob

--
-----------------------------------------------
B. Azmoun
Brookhaven National Laboratory
Physics Dept. Bldg. 510 C
Upton, NY 11973
P: (631) 344-4082
F: (631) 344-3253
-----------------------------------------------

[Sphenix-tpc-l] TPC Laser Calibration Meeting: Fri. August 28, 9am, Bob Azmoun, 08/27/2020
- Re: [Sphenix-tpc-l] TPC Laser Calibration Meeting: Fri. August 28, 9am, Dan Cacace, 08/28/2020
  - Re: [Sphenix-tpc-l] TPC Laser Calibration Meeting: Fri. August 28, 9am, Dan Cacace, 08/28/2020
    - Re: [Sphenix-tpc-l] TPC Laser Calibration Meeting: Fri. August 28, 9am, Thomas K Hemmick, 08/28/2020
      - Re: [Sphenix-tpc-l] TPC Laser Calibration Meeting: Fri. August 28, 9am, Bob Azmoun, 08/28/2020