Skip to Content.
Sympa Menu

sphenix-tracking-l - [Sphenix-tracking-l] FW: Drawing showing the intermediate tracker lengths as per Jin's suggestion

sphenix-tracking-l AT lists.bnl.gov

Subject: sPHENIX tracking discussion

List archive

Chronological Thread  
  • From: "Ming Liu (ming AT bnl.gov)" <ming AT bnl.gov>
  • To: sphenix-tracking <sphenix-tracking-l AT lists.bnl.gov>
  • Subject: [Sphenix-tracking-l] FW: Drawing showing the intermediate tracker lengths as per Jin's suggestion
  • Date: Wed, 07 Sep 2016 23:45:38 -0600

FYI, tracking geometry with updated ITTN, + MAPS + TPC, from Walt Sondheim.
Cheers,
Ming
-- 
Ming Xiong Liu
P-25, MS H846 TEL: 505-667-7125 
Physics Division 631-344-7821(BNL)
LANL 630-840-5708(FNAL)
Los Alamos, NM 87545 FAX: 505-665-7020

From: Walter Sondheim <sondheim AT lanl.gov>
Date: Wednesday, September 7, 2016 at 9:20 PM
To: "Ming Liu (LANL)" <ming AT bnl.gov>
Subject: FW: Drawing showing the intermediate tracker lengths as per Jin's suggestion

I guess you are using your BNL account –

Walt

 

From: Sondheim, Walter E
Sent: Wednesday, September 07, 2016 9:19 PM
To: Liu, Ming Xiong <mliu AT lanl.gov>
Subject: FW: Drawing showing the intermediate tracker lengths as per Jin's suggestion

 

Hi Ming, I am having trouble posting this  e-mail to the sphenix tracking list, could you try? I wonder if the issue  is the attachment sizes.

Thanks,

Walt

 

From: Sondheim, Walter E
Sent: Wednesday, September 07, 2016 8:52 PM
To: 'sphenix-tracking-l-bounces AT lists.bnl.gov' <sphenix-tracking-l-bounces AT lists.bnl.gov>
Subject: FW: Drawing showing the intermediate tracker lengths as per Jin's suggestion

 

 

I have attached  a drawing that incorporates new Z envelopes for the intermediate tracker. First you will notice the envelope for the TPC detector with R going from 20 to 78.0cm and a  Z length of 211.0 cm. This drawing shows both the Alice inner tracker along with Tony’s proposed Z length for the intermediate tracker. On the right side you see how these four layers would need to be extended along Z  to match a radial line from the acceptance end on the Alice inner tracker sensors to the outer radial point of the TPC. In this drawing the acceptance covers the
TPC for all tracks that can be seen by the ALICE ITC.

The second drawing shows Tony’s  proposed Z lengths for the Intermediate tracker, this is based on sensors that are 12.0 mm in length (Z). Covering the TPC acceptance for tracks staring at Z=0.

Walter

Attachment: ITC + ITTN + TPC Frawley-Jin.PDF
Description: Adobe PDF document

Attachment: ITC + ITTN + TPC Frawley.PDF
Description: Adobe PDF document



  • [Sphenix-tracking-l] FW: Drawing showing the intermediate tracker lengths as per Jin's suggestion, Ming Liu (ming AT bnl.gov), 09/07/2016

Archive powered by MHonArc 2.6.24.

Top of Page