sPHENIX tracking discussion

[pinkenburg <pinkenburg AT bnl.gov>]

    should I copy the files to cvmfs so we get a head start and can see
    if this actually works?
    
    Chris

On 1/4/2022 11:33 AM, Hugo Pereira Da Costa via sPHENIX-tracking-l wrote:

Hello

As discussed during today's meeting here are the set of distortion maps and reconstructed maps that I have been using

Static distortions

  G4TPC::ENABLE_STATIC_DISTORTIONS = true;
  G4TPC::static_distortion_filename = "/star/u/rcorliss/sphenix/trackingStudySampleNov2021/static_only.distortion_map.hist.root";
    
  G4TPC::ENABLE_CORRECTIONS = true;
  G4TPC::correction_filename = "/phenix/u/hpereira/sphenix/work/g4simulations/distortion_maps-new/static_only_inverted_10-new.root";

Beam induced, time averaged distortions

  G4TPC::ENABLE_STATIC_DISTORTIONS = true;
  G4TPC::static_distortion_filename = "/phenix/u/hpereira/sphenix/work/g4simulations/distortion_maps-new/average_minus_static_distortion_converted.root";
   
  G4TPC::ENABLE_CORRECTIONS = true;
  G4TPC::correction_filename = "/phenix/u/hpereira/sphenix/work/g4simulations/distortion_maps-new/average_minus_static_distortion_inverted_10-new.root"; 

Joe has been using slightly different ones, but they should not have major differences

  G4TPC::ENABLE_STATIC_DISTORTIONS = true;
  G4TPC::static_distortion_filename = "/phenix/u/hpereira/sphenix/work/g4simulations/distortion_maps-new/average_minus_static_distortion_converted.root";

  G4TPC::ENABLE_CORRECTIONS = true;
  G4TPC::correction_filename = "/phenix/u/hpereira/sphenix/work/g4simulations/distortion_maps-new/average_minus_static_distortion_inverted_4.root";
 

The inverted maps have been generated with the macro attached.

In the inverted map filenames above, the last number (4 or 10) is the number of sampled steps taken in each input map bin to generate the inverted map

On 1/3/22 14:41, Ross Corliss via sPHENIX-calibration-l wrote:

        Dear Distortions Folks,
        
        Let's meet at the usual time tomorrow, Tuesday, 11AM EDT, to
        discuss status and intentions for the upcoming collaboration
        meeting.  Other topics are welcome of course.  If you let me
        know in advance, I will add a slot to the agenda for you.
        
        https://stonybrook.zoom.us/j/94081538941?pwd=Y256N3ptUC9zV2M4cjNtUGgyWnJYdz09
        
        https://indico.bnl.gov/event/13724/
        
        -Ross

==========
Dr. Ross Corliss

If it's work hours, and I'm not in a meeting, feel free to look for me in my virtual office:
https://stonybrook.zoom.us/my/rossoffice?pwd=ZmZ2SlRIMVFvUUJwbUkyOVNVTmE5QT09

_______________________________________________
sPHENIX-calibration-l mailing list
sPHENIX-calibration-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/sphenix-calibration-l
      
      
      
_______________________________________________
sPHENIX-tracking-l mailing list
sPHENIX-tracking-l AT lists.bnl.gov
https://lists.bnl.gov/mailman/listinfo/sphenix-tracking-l
    
    
-- 
*************************************************************

Christopher H. Pinkenburg	;    pinkenburg AT bnl.gov
				;    http://www.phenix.bnl.gov/~pinkenbu

Brookhaven National Laboratory	;    phone: (631) 344-5692
Physics Department Bldg 510 C	;    fax:   (631) 344-3253
Upton, NY 11973-5000

*************************************************************