star-fst-l AT lists.bnl.gov
Subject: Star-fst-l mailing list
List archive
- From: 董家宁 <jndong AT sdu.edu.cn>
- To: <star-fst-l AT lists.bnl.gov>
- Subject: Re: [Star-fst-l] T-board material and thickness
- Date: Fri, 25 Jan 2019 10:44:07 +0800
Hi Gerard,
Thanks for the suggestions.
I have asked the vendor, and they tell me that 1/2 ounce copper and 1.2 mm
overall thick can be achieved.
If there are no special requirements for the material, I also think "FR-4"
is suitable for its wide application in PCB production.
So we'll try "FR-4" as material and 1.2 mm as overall thickness with 1/2
ounce copper per layer for prototype T-board.
Thank you so much.
Best,
Jianing
> -----原始邮件-----
> 发件人: "Li YI" <li.yi AT sdu.edu.cn>
> 发送时间: 2019-01-25 00:54:25 (星期五)
> 收件人: "董家宁" <jndong AT sdu.edu.cn>
> 抄送:
> 主题: Re:Re: [Star-fst-l] T-board material and thickness
>
>
>
>
> 在 2019-01-24 23:40:41,"Gerard Visser" <gvisser AT indiana.edu> 写道:
>
> >Hi Li,
> > I would suggest maybe 1.2 mm as a good overall thickness of the
> > T-board PCB.
> >Thicker than that I think isn't justified for mechanical reasons, and of
> >course
> >we should keep material to a minimum. (Will you use 1/2 ounce copper or 1
> >ounce?)
> > As for material, I'd suggest a high reliability "FR-4" type of
> > material. Isola
> >370HR is sort of the industry standard choice there, but there are many
> >options
> >I'm sure. Ask your fabrication vendor what they would recommend.
> > Sincerely,
> >
> > Gerard
> >
> >
> >On 1/24/2019 10:34 AM, LI YI wrote:
> >> Dear Gerard and All,
> >>
> >> We have updated *final* T-board layout with 60mm * 24mm in size.
> >>
> >> What shall be the materials for T-board? And T-board thickness?
> >>
> >> Thanks!
> >>
> >> Best,
> >> Li
-
[Star-fst-l] T-board material and thickness,
LI YI, 01/24/2019
-
Message not available
-
Message not available
-
Re: [Star-fst-l] T-board material and thickness,
董家宁, 01/24/2019
- Re: [Star-fst-l] T-board material and thickness, Aschenauer Elke-Caroline, 01/25/2019
-
Re: [Star-fst-l] T-board material and thickness,
董家宁, 01/24/2019
-
Message not available
-
Message not available
Archive powered by MHonArc 2.6.24.